Document
MUR1620CT THRU MUR1660CT
16.0 AMPS. Switchmode Power Rectifiers
Voltage Range 200 to 600 Volts Current 16.0 Ampere
Features
Ultrafast 35 and 60 Nanosecond Recovery times O 175 Coperating Junction Temperature Popular TO-220 Package Epoxy meets UL94, V O @ 1/8” High temperature glass passivated junction www.DataSheet4U.com High voltage capability to 600 volts O Low leakage specified @ 150 C case temperature Current derating @ both case and ambient temperatures
TO-220
Mechanical Data
Case: Epoxy, molded Lead temperature for soldering purposes: 260OC Max. for 10 seconds Finish: all external surfaces corrosion resistant and terminal leads are readily solderable Shipped 50 units per plastic tube Weight: 1.9 grams (approximately)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS
Type Number
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current Per Leg O Total Device, (Rated VR), Tc=150 C Total Device Peak Rectified Forward Current (Rated VR, Square Wave, 20 KHz), Tc=150℃ Per Diode Leg Nonrepetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) Operating Junction Temperature and Storage Temperature Maximum Thermal Resistance, Junction to Case Maximum Instantaneous Forward Voltage (Note 1) ( IF=8.0 Amps, Tc=25℃ ) ( IF=8.0 Amps, Tc=150℃ ) Maximum Instantaneous Reverse Current at Rated DC Blocking Voltage @ TA=25℃ @ TA=125℃ Maximum Reverse Recovery Time (IF=0.5 Amp, IR=1.0 Amp, IREC=0.25 Amp)
Symbol
VRRM VRWM VR IF(AV)
MUR 1620CT 200
MUR 1640CT 400 8.0 16 16 100 -65 to +175
MUR 1660CT 600
Units V
A A A ℃
℃ /W
IFM IFSM TJ, TSTG
THERMAL CHARACTERISTICS, PER DIODE LEG
RθJC 3.0 2.0
ELECTRICAL CHARACTERISTICS, PER DIODE LEG
VF IR Trr 0.975 0.895 5.0 250 25 1.30 1.300 10 500 50 1.50 1.20 V uA uA nS
Note: 1. Pulse Test: Pulse Width = 300 us, Duty Cycle ≦ 2.0%.
- 376 -
RATINGS AND CHARACTERISTIC CURVES (MUR1620CT THRU MUR1660CT)
FIG.1- CURRENT DERATING, CASE, PER LEG
10
IF(A), AVERAGEPOWER DISSIPATION (W)
FIG.3- TYPICAL FORWARD VOLTAGE, PER LEG
100
9.0 8.0 7.0 6.0 5.0
dc
RATED VR APPLIED
70 50
30 20
4.0 www.DataSheet4U.com 3.0 2.0 1.0 0 140
145 150 155 160 165
o
SQUARE WAVE Tj=175 0C
IF, INSTANTANEOUS FORWARD CURRENT. (A)
10 7.0 5.0
25 0C
100 0C
170
175
180
TC, CASE TEMPERATURE. ( C)
FIG.2- TYPICAL REVERSE CURRENT, PER LEG
800 400 200
IR, REVERSE CURRENT. ( A)
3.0 2.0
80 40 20 8.0 4.0 2.0 0.8 0.4 0.2 0.08 0.04 0.02 0
0 20 40 60
Tj=175 0C
1.0 0.7 0.5
100 C
0
25 0C
0.3 0.2
80 100 120 140 160 180 200
VR, REVERSE VOLTAGE. (V)
*The curves shown are typical for hightest voltage deice in the voltage grouping. Typical reverse current for lower voltage selections can be estimated from these same curves if VR is sufficiently below rated VR.
0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1
1.2
VF, INSTANTANEOUS VOLTAGE. (V)
FIG.4- TYPICAL CAPACITANCE, PER LEG
1000
IF(A), AVERAGE FORWARD CURRENT. (A)
FIG.5- CURRENT DERATING, AMBI.