miniSMDC020

Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 800-227-4856 FAX 800-227-4866 R PolySwitch® PTC Devices Overcurrent Protection Device PRODUCT: miniSMDC020 DOCUMENT: SCD24475 PCN: 245571-000 www.DataSheet4U.com REV LETTER: B REV DATE: JUNE 22, 2000 PAGE NO.: 1 OF 1 Specification Status: RELEASED Maximum Electrical Rating Voltage: 30VDC Current: 10A Notes: 1. All terminations are tin/lead plated. 2. Devices can be wave soldered. 3. Drawing not to scale Marking: TABLE I. DIMENSIONS: A B C D E MIN MAX MIN MAX MIN MAX MIN MIN MAX mm: 4.37 4.73 3.07 3.41 0.635 0.890 0.30 0.25 0.50 in: (0.172) (0.186) (0.121) (0.134) (0.025) (0.035) (0.012) (0.010) (0.020) TABLE II. PERFORMANCE RATINGS: IHOLD ** HOLD CURRENT AT TEMPERATURE** TIME TO RATED TRIP ** CURRENT @ 8.0A AMPERES AMPERES AMPERES AMPERES SECONDS AT 20°C AT - 40°C AT 20°C AT 60°C AT 20°C HOLD HOLD HOLD HOLD 0.20 0.30 0.20 0.13 0.02 RESISTANCE VALUES OHMS AT 20°C MIN MAX* 0.60 3.30 POWER DISSIPATION WATTS AT 20°C MAX 0.8 * Maximum resistance is measured 1 hour after reflow. **Values Specified were determined using PCB’s with 0.030”X1.5 ounce copper traces. Reference Documents: Precedence: Effectivity: CAUTION: PS300, E. N. SMD1.0x This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. ...