DatasheetsPDF.com

UCLAMP0506A

Part Number	UCLAMP0506A
Manufacturer	Semtech Corporation
Description	5-Line ESD protection Array
Published	Apr 2, 2010
Detailed Description	μClampTM com 5-Line ESD protection Array PROTECTION PRODUCTS - MicroClampTM Description The μClampTM ser...
Datasheet	UCLAMP0506A PDF File

Overview

μClampTM com 5-Line ESD protection Array PROTECTION PRODUCTS - MicroClampTM Description The μClampTM series of TVS arrays are designed to protect sensitive electronics from damage or latch-up due to ESD.
They are designed for use in applications where board space is at a premium.
Each device requires less than 2.
9mm2 of PCB area and will protect up to five lines.
They are bidirectional devices and may be used on lines where the signal polarities swing above and below ground.
TVS diodes are solid-state devices designed specifically for transient suppression.
They feature large cross-sectional area junctions for conducting high transient currents.
They offer desirable character...

Similar Datasheet

UCLAMP0501H 1-Line ESD protection - Semtech Corporation
UCLAMP0501P 1-Line ESD protection - Semtech Corporation
UCLAMP0501T 1-Line ESD protection - Semtech Corporation
UCLAMP0502P 2-Line ESD protection - Semtech Corporation
UCLAMP0502T 2-Line ESD protection - Semtech Corporation
UCLAMP0504A 4-Line ESD protection Array - Semtech Corporation
UCLAMP0504T Low Profile Clamp 4-Line ESD Protection - Semtech Corporation
UCLAMP0505A 5-Line ESD protection Array - Semtech Corporation
UCLAMP0506A 5-Line ESD protection Array - Semtech Corporation
UCLAMP0506P 6-Line ESD protection Array - Semtech Corporation

Since 2006. D4U Semicon,
Electronic Components Datasheet Search Site. (Privacy Policy & Contact)