20-BIT TWO PORT BUS SWITCH
www.DataSheet4U.com
B5S162862
20-BIT TWO PORT BUS SWITCH WITH FOUR ENABLE CONTROL AND 25Ω SERIES RESISTOR IN OUTPUT
PRE...
Description
www.DataSheet4U.com
B5S162862
20-BIT TWO PORT BUS SWITCH WITH FOUR ENABLE CONTROL AND 25Ω SERIES RESISTOR IN OUTPUT
PRELIMINARY DATA
s
s
s
s
s
s
s
s s
HIGH SPEED: tPD = 1.25ns (MAX.) at VCC = 4.5V TA=85°C ON RESISTANCE BETWEEN TWO PORT: 25Ω (TYP) at VCC = 5.0V TA=25°C LOW POWER DISSIPATION: ICC = 1uA(MAX.) at TA=25°C COMPATIBLE WITH TTL OUTPUTS: VIH=2V(MIN), VIL=0.8V(MAX) POWER DOWN PROTECTION ON INPUTS AND OUTPUTS OPERATING VOLTAGE RANGE: VCC(OPR) = 4V to 5.5V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 16862 IMPROVED LATCH-UP IMMUNITY ESD PERFORMANCE: HBM > 2000V (MIL STD 883 method 3015); MM > 200V
TSSOP
ORDER CODES
PACKAGE TSSOP48 T&R B5S162861TTR
PIN CONNECTION
DESCRIPTION The B5S162862 is an advanced high-speed CMOS 20-BIT TWO PORT BUS SWITCH fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS tecnology. It is ideal for 4V to 5.5V VCC operations and ultra-low power and low noise applications, typically notebook and docking station. Any nG output control governs four 5-bit BUS SWITCHES. Output Enable inputs (nG) tied together gives full 20-bit operations. When nG is LOW, the switches are on. When nG is HIGH, the switches are in high impedance state. It has ultra high-speed performance at 5V near zero delay with low ON resistance and include 25Ω series resistor to reduce noise resulting from reflections, thus eliminating the need for an external terminating resistor. All inputs and outputs are equipped with protection circuits against s...
Similar Datasheet