Buck (Step-down) WLED Driver
Buck (Step-down) WLED Driver with External Switch
SOT-25
Pin Definition: 1. SW 2. Ground 3. CT 4. ISENSE 5. VIN
www.Dat...
Description
Buck (Step-down) WLED Driver with External Switch
SOT-25
Pin Definition: 1. SW 2. Ground 3. CT 4. ISENSE 5. VIN
www.DataSheet4U.com
TS19372
General Description
The TS19372 is a continuous mode inductive step-down converter, designed for driving single or multiple series connected LEDs efficiently from a voltage source higher than the LED voltage. The device operates from an input supply between 6V and 40V and provides 300mA output current to drive external N-channel MOSFET. TS19372 includes the output switch and a high-side output current sensing circuit, which uses an external resistor to set the nominal average output current.
Features
● ● ● ● ● ● ● Wide Input Voltage Range 6V~40V 300mA Output Current High Efficiency up to 92% Drives up to 3 (1~3W) LEDs @ VIN 12V Drives up to 7 (1~3W) LEDs @ VIN 24V 180kHz Switching Frequency Internal PWM Filter
Application
● ● ● ● ● LED Flashlights White LED Backlighting White LED Driving Multiple LED Driving LED Lighting Equipment
Ordering Information
Part No.
TS19372CX5 RF
Package
SOT-25
Packing
3Kpcs / 7” Reel
Block Diagram
1/6
Version: A09
Buck (Step-down) WLED Driver with External Switch
Absolute Maximum Rating
Parameter
Input Voltage Supply Voltage (Recommended) FB Voltage SW Voltage Output SW Current Power Dissipation Ambient Temperature Range Junction Temperature Range
www.DataSheet4U.com
TS19372
Symbol
VIN VIN VFB VSW ISW PD TA TJ
Limit
40 6 ~ 40 -0.3 ~ 40 36 300 450 -40 to +85 +150
Unit
V V V V mA mW
o o
C C
...
Similar Datasheet