Clock Divider
1.8 V/2.5 V, 10 GHz ÷2 Clock Divider with CML Outputs
Multi−Level Inputs w/ Internal Termination
NB7V32M
Description Th...
Description
1.8 V/2.5 V, 10 GHz ÷2 Clock Divider with CML Outputs
Multi−Level Inputs w/ Internal Termination
NB7V32M
Description The NB7V32M is a differential B2 Clock divider with
asynchronous reset. The differential Clock inputs incorporate internal 50 W termination resistors and will accept LVPECL, CML and LVDS logic levels.
The NB7V32M produces a B2 output copy of an input Clock operating up to 10 GHz with minimal jitter.
The RESET Pin is asserted on the rising edge. Upon power−up, the internal flip−flops will attain a random state; the Reset allows for the synchronization of multiple NB7V32M’s in a system.
The 16 mA differential CML output provides matching internal 50 W termination which guarantees 400 mV output swing when externally receiver terminated with 50 W to VCC .
The NB7V32M is the 1.8 V/2.5 V version of the NB7L32M (2.5 V/3.3 V) and is offered in a low profile 3 mm x 3 mm 16−pin QFN package. The NB7V32M is a member of the GigaComm™ family of high performance clock products. Application notes, models, and support documentation are available at www.onsemi.com.
Features
Maximum Input Clock Frequency > 10 GHz, typical Random Clock Jitter < 0.8 ps RMS 200 ps Typical Propagation Delay 35 ps Typical Rise and Fall Times Differential CML Outputs, 400 mV Peak−to−Peak, Typical Operating Range: VCC = 1.71 V to 2.625 V with GND = 0 V Internal 50 W Input Termination Resistors QFN−16 Package, 3 mm x 3 mm −40°C to +85°C Ambient Operating Temperature These Devices are...
Similar Datasheet