R2J20602NP
Integrated Driver – MOS FET (DrMOS)
REJ03G1480-0300 Rev.3.00 Jun 30, 2008
Description
The R2J20602NP multi-c...
R2J20602NP
Integrated Driver – MOS FET (DrMOS)
REJ03G1480-0300 Rev.3.00 Jun 30, 2008
Description
The R2J20602NP multi-chip module incorporates a high-side MOS FET, low-side MOS FET, and MOS-FET driver in a single QFN package. The on and off timing of the power MOS FET is optimized by the built-in driver, making this device suitable for large-current buck converters. The chip also incorporates a high-side bootstrap
Schottky barrier diode (SBD), eliminating the need for an external SBD for this purpose. Integrating a driver and both high-side and low-side power MOS FETs, the new device is also compliant with the package standard “Integrated Driver – MOS FET (DrMOS)” proposed by Intel Corporation.
Features
Built-in power MOS FET suitable for applications with 12 V input and low output voltage Built-in driver circuit which matches the power MOS FET Built-in tri-state input function which can support a number of PWM controllers VIN operating-voltage range: 16 V max High-frequency operation (above 1 MHz) possible Large average output current (Max. 40 A) Achieve low power dissipation (About 4.4 W at 1 MHz, 25 A) Controllable driver: Remote on/off Built-in
Schottky diode for bootstrapping Low-side drive voltage can be independently set Small package: QFN56 (8 mm × 8 mm × 0.95 mm) Terminal Pb-free
Outline
www.DataSheet4U.com
VCIN BOOT GH VIN 56 Driver Tab Reg5V VSWH Low-side MOS Tab PWM 43 28 High-side MOS Tab 1 14
15
DISBL#
MOS FET Driver
CGND VLDRV
GL...