DatasheetsPDF.com

SC744110 Dataheets PDF



Part Number SC744110
Manufacturers celduc-relais
Logo celduc-relais
Description Power Solid State Relay
Datasheet SC744110 DatasheetSC744110 Datasheet (PDF)

page 1 /2 F/GB Relais statique monophasé de puissance Power Solid State Relay • Sortie AC non synchrone : 12-280VAC-40A • Possibilité de protection IP20 en option : Capot 1K460000 • Adapté pour le contrôle du moteur et la commande en angle de phase • 12-280VAC -40A Random AC Output. • IP20 Protection optional (1K460000). • Designed for motor control & phase angle control. Dimensions/Size SC744110 3-30VDC control 40A/230VAC output Application typique/Typical application 27 22,8 ±0,5 12-280VAC.

  SC744110   SC744110


Document
page 1 /2 F/GB Relais statique monophasé de puissance Power Solid State Relay • Sortie AC non synchrone : 12-280VAC-40A • Possibilité de protection IP20 en option : Capot 1K460000 • Adapté pour le contrôle du moteur et la commande en angle de phase • 12-280VAC -40A Random AC Output. • IP20 Protection optional (1K460000). • Designed for motor control & phase angle control. Dimensions/Size SC744110 3-30VDC control 40A/230VAC output Application typique/Typical application 27 22,8 ±0,5 12-280VAC 28 Ø4,7 M4 protection réseau line protection 19,6 1~ 58,2 43,2 2~ 47,6 Entrée control 3-30VDC 4- 1 47,5 3+ + 5,1 3+ 2 25,8 TOLERANCES 0,3 ± 25,4 44,5 M3 * 1-2 peuvent être inversées/ 1 -2 can be changed * le relais doit être monté sur dissipateur thermique / SSR must be mounted on a heatsink * option : couvercle de protection des bornes : 1K460 000 / cover : 1K460 000 CHARGE/ LOAD Caractéristiques de commande (à 20°C) / Control characteristics (at 20°C) Paramètre / Parameter Tension de commande / Control voltage www.DataSheet4U.com Courant de commande / Control current (@ Uc ) Tension de relachement/Release voltage Résistance interne / Input internal resistor fig.1 Tension inverse / Reverse voltage Symbol Uc Ic Uc off Rc Urv Min 3 3 1 DC Nom Max 30 30 Unit V mA V Ω V VRMS VRMS V 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 fig. 1 :Caractéristique d'entrée / Control characteristic fig1 : Caractéristique d'entrée / Control characteristic 1000 30 Caractéristiques d'entrée-sortie (à 20°C) / Input-output characteristics (at 20°C) Isolement entrée-sortie/Input-output isolation @500m Ui 4000 Isolement sortie-semelle/Output-case isolation @500m Ui 2500 Tension assignée Isolement/Rated impulse voltage Uimp 4000 Caractéristiques générales / General characteristics Paramètre / Parameter Poids/Weight Plage de température de stockage / Storage temperature range Plage de température de fonctionnement/Operating temperature range Ic (mA) 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 Uc (V) Conditions Symbol Typ. 90 -40 / +100 -40 / +100 Unit g °C °C Proud to serve you All technical caracteristics are subject to change without previous notice. Caractéristiques sujettes à modifications sans préavis. celduc r e l a i  s S/MON/SC744110/A/21/02/2000 Caractéristiques de sortie(à 20°C) / Output characteristics (at 20°C) Paramètre / Parameter Tension de charge /Load voltage Plage tension de fonctionnement / Operating range Tension crête / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorçage / Latching voltage Courant nominal AC-51/ AC-51 nominal current Courant nominal AC-53/ AC-53 nominal current Courant de surcharge non répétitif /Non repetitive overload current Chute tension directe crête/ On state voltage drop Courant de fuite état bloqué/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de fréquence / Operating frequency range dv/dt état bloqué / Off state dv/dt dI/dt maximum non répétitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunité conduite / Conducted immunity level EMC Test d'immunité conduite / Conducted immunity level Conformité / Conformity Pd ( watts) 60 55 50 45 1,6K/W 40 35 2,2K/W 30 25 20 6K/W 15 10 5 0 50% on state Full on state page 2 / 2 F/GB Symbol Typ. Unit Ue 230 V rms Ue min-max 12-280 V rms Up 600 V Usync Random V Ie nom Ua 8 V ( see Fig. 2 ) Ie AC-51 40 A rms ( see Fig. 2 ) Ie AC-53 9 A rms tp=10ms (Fig. 3) Itsm 350 A @ Ie nom Vd 1,4 V @Ue, 50Hz Ilk <3 mA Ie min 5 mA Uc nom DC ,f=50Hz ton max 100 µs Uc nom DC ,f=50Hz toff max 10 ms f 0,1-440 Hz dv/dt 500 V/µs di/dt 50 A/µs I2t 612 A2s IEC 1000-4-4 (burst) 2kV criterion B IEC 1000-4-5(schocks) 2kV crit.A with external VDR EN60947-4-x T case max (°C) 65 70 1,1K/W 75 80 85 90 95 100 Conditions Fig. 2 Courbes thermiques / Thermal characteristics 0,95K/W 0,75K/W 0,55K/W www.DataSheet4U.com 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 RMS load current : I (A) 0 10 20 30 40 50 60 70 80 90 100 110 120 Ambient temperature : Tamb (°C) Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modéle 40A(Itsm=350A) Surge current : Itsm (Apeak) = f(t) for 40A models with Itsm =350A 400 Itsm (Apeak) 300 200 100 0 Surcharge de courant répétitive avec tension réappliquée Repetive surge current with voltage reapplied. Surcharge de courant non répétitive sans tension réappliquée / No repetive surge current without voltage reapplied. 1 -Itsm non répétitif sans tension réappliquée est donné pour la détermination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm répétitif est donné pour des surcharges de courant (Tj initiale=70°C). La répétition de ces surcharges de courant diminue la durée de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70°C. The repetition of the surge current decrease the.


SC7422 SC744110 SC7461


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)