DatasheetsPDF.com

SIL25C-12SNEG-VJ Dataheets PDF



Part Number SIL25C-12SNEG-VJ
Manufacturers Emerson
Logo Emerson
Description DC-DC Converter
Datasheet SIL25C-12SNEG-VJ DatasheetSIL25C-12SNEG-VJ Datasheet (PDF)

SIL25C Series DC-DC CONVERTERS • • • • • • C Class Non-isolated 12 Vin single negative output 1 NEW Product • • 25 A current rating Input voltage range: 10.2 Vdc to 13.8 Vdc nominal output voltage: -5.05 Vdc Industry leading value • Cost optimized design Excellent transient response Output Voltage adjustability • Supports silicon voltage migration • Resulting in reduced design-in and qualification time Designed in reliability: MTBF of 3 million hours per Telcordia SR-332 Available RoHS compli.

  SIL25C-12SNEG-VJ   SIL25C-12SNEG-VJ


Document
SIL25C Series DC-DC CONVERTERS • • • • • • C Class Non-isolated 12 Vin single negative output 1 NEW Product • • 25 A current rating Input voltage range: 10.2 Vdc to 13.8 Vdc nominal output voltage: -5.05 Vdc Industry leading value • Cost optimized design Excellent transient response Output Voltage adjustability • Supports silicon voltage migration • Resulting in reduced design-in and qualification time Designed in reliability: MTBF of 3 million hours per Telcordia SR-332 Available RoHS compliant The SIL25C Series is a new high density non-isolated dc-dc converter. The converter has a wide input range (10.2 Vdc to 13.8 Vdc) and offers a -4.5 Vdc to -5.5 Vdc output voltage range with a 25 A load. The series offers remote ON/OFF, overtemperature protection and overcurrent protection as standard. The remote sense feature enables the SIL25C compensate for voltage drops between the converters output and the load. With full international safety approvals including EN60950 and UL/cUL60950 the SIL25C reduces compliance costs and time to market. 2 YEAR WARRANTY All specifications are typical at nominal input, full load at 25 °C ambient unless otherwise stated SPECIFICATIONS OUTPUT SPECIFICATIONS Voltage adjustability (See Note 1) -4.5 Vdc to -5.5 Vdc ±3.0% ±1.0% max. ±1.0% max. 0 A/25 A (See Note 2) Deviation 100 mV pk-pk 50 mV rms 75 mV typ. 150 µs recovery to within regulation band INPUT SPECIFICATIONS (CONTD.) Turn ON threshold Turn OFF threshold GENERAL SPECIFICATIONS Efficiency Switching frequency Approvals and standards (pending) Material flammability Weight MTBF Telcordia SR-332 90% Fixed (2 phase) 250 kHz typ. per phase (See Note 7) TÜV Product Services IEC60950, UL/cUL60950 UL94V-0 28.3 g (1 oz) 3,000,000 hours 10 Vdc 9.5 Vdc Output setpoint accuracy Using 1.0% trim resistors Line regulation Load regulation Min./max. load Ripple and noise 5 Hz to 20 MHz Transient response (See Note 3) Low line to high line Full load to min. load INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) Input reflected ripple Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 5) Power up Remote ON/OFF Nominal 12 V No load Remote OFF (See Note 4) (See Note 2) 10.2-13.8 +Vdc 400 mA 30 mA 14.2 A max. @ Io max. and Vin = 10.8 V 300 mA (pk-pk) Logic high >2.4 Vdc <1.2 Vdc <10 ms <10 ms ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 8) Operating ambient, temperature Non-operating -40 ºC to +80 ºC -40 ºC to +125 ºC PROTECTION Short-circuit Over-temperature RECOMMENDED SYSTEM CAPACITANCE Input capacitance Output capacitance (See Note 9) (See Note 9) 3 x 270 µF 3 x 680 µF Hiccup, non-latching Hiccup, non-latching International Safety Standard Approvals (pending) UL/cUL CAN/CSA 22.2 No. TBD UL60950 File No. TBD TÜV Product Service (EN60950) Certificate No. TBD CB report and certificate to TBD File Name: sil25c_12_neg.pdf Rev (02): 16 Dec 2005 SIL25C Series DC-DC CONVERTERS C Class Non-isolated OUTPUT POWER (MAX.) 125 W INPUT VOLTAGE 10.2-13.8 Vdc OVP N/A OUTPUT VOLTAGE (10) -5.05 V 12 Vin single negative output 2 NEW Product For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT CURRENT (MIN.) 0A OUTPUT CURRENT (MAX.) 25 A EFFICIENCY (TYP.) 90% REGULATION LINE ±1.0% LOAD ±1.0% MODEL NUMBER(11,12) SIL25C-12SNEG-VJ Part Number System with Options SIL25C-12SNEG-VJ Product Family SIL = Single in Line Rated Output Current 25 = 25 Amps Performance C = Cost Optimized Packaging Options (11) J = Pb-free (RoHS 6/6 compliant) Mounting Option V = Vertical Mount Polarity NEG = -5.05 V Number of Outputs S = Single Output Input Voltage 12 = 10.2 Vdc to 13.8 Vdc Notes Uses external resistor. See Application Note 148 for details. Measured with external filter. See Application Note 148 for details. di/dt = 1 A/µs, Vin = Nom, Tc = 25 °C, load change = 0.5 lo max to 0.75 lo max and 0.75 lo max to 0.5 lo max. 4 External input fusing is recommended. 5 Power up is the time from application of dc input to POWER GOOD high. Remote ON/OFF asserted high to POWER GOOD high. 6 Signal line assumed <3 m. 7 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 8 See Application Note 148 for operation above 50ºC. 9 See Application Note 148 for ripple current requirements. 10 Output can be adjusted from -4.5 Vdc to -5.5 Vdc. 11 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 12 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. 1 2 3 File Name: sil25c_12_neg.pdf Rev (02): 16 Dec 2005 SIL25C Series DC-DC CONVERTERS C Class Non-isolated 12 Vin single negative output 3 NEW Product For the most current data and appli.


SIL20C2-00SADJ-VJ SIL25C-12SNEG-VJ SIL30C-12SADJ-HJ


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)