Document
SIL06C Series
DC-DC CONVERTERS • • • • • • C Class Non-isolated
5 Vin and 12 Vin single output
1 NEW Product
• •
6 A current rating Input voltage range: 4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc Output voltage range: 0.9 Vdc to 5.0 Vdc Industry leading value • Cost optimised design Excellent transient response Output Voltage adjustability • Pathway for future upgrades • Supports silicon voltage migration • Resulting in reduced design-in and qualification time Designed in reliability: MTBF of >7 million hrs per Telcordia SR-332 Available RoHS compliant
The SIL06C series is a new high density open frame non-isolated converter for space sensitive applications. Each model has a wide input range (4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc) and offer a wide 0.9 Vdc to 5 Vdc output voltage range with a 6 A load. An external resistor adjusts the output voltage from its pre-set value of 0.9 V to any value up to the 5 V maximum. Typical efficiencies for the models are 89% for the 5 V input version and 91% for the 12 V input version. The SIL06C series offers remote ON/OFF and overcurrent protection as standard. With full international safety approval including EN60950 and UL/cUL60950, the SIL06C reduces compliance costs and time to market.
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS Voltage adjustability (See Note 7) 5 V input models 12 V input models 0.9-3.3 Vdc 0.9-5.0 Vdc ±2.5% ±0.2% max. ±0.5% max. 0 A/6 A 5 V input models 12 V input models 3.0% max. 1.0% max. 100 mV max. 5 Hz to 20 MHz (See Note 2) See table Deviation 75 mV 150 µs recovery to within regulation band
INPUT SPECIFICATIONS (CONTD.) Turn ON threshold Turn OFF threshold 5 Vin 12 Vin 5 Vin 12 Vin 4.5 Vdc 9.0 Vdc 4.3 Vdc 7.5 Vdc
Output setpoint accuracy With 1.0% trim resistors Line regulation Load regulation Min./max. load Overshoot (at turn on) Undershoot Ripple and noise Transient response (See Note 1) Low line to high line Full load to min. load
GENERAL SPECIFICATIONS Efficiency Switching frequency Approvals and standards Material flammability Weight MTBF Telcordia SR-332 Fixed (See Note 4) See Table 200 kHz TÜV Product Services IEC60950, UL/cUL60950 UL94V-0 9.3 g (0.3 oz) 7,562,142 hours
INPUT SPECIFICATIONS Input voltage range Input current Input current (max.) (See Note 9) Input reflected ripple (See Note 2) Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 3) Power up Remote ON/OFF 5 V input model 12 V input model No load Remote OFF 5 V input model 12 V input model 5 V input model 12 V input model 4.5-5.5 Vdc 10.2-13.8 Vdc 50 mA 5 mA 5.1 A @ Io max. 1.6 A @ Io max. 52 mA (pk-pk) 56 mA (pk-pk) Active high >2.4 Vdc <0.8 Vdc <20 ms <20 ms
ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 8) Operating ambient, temperature Non-operating 0 ºC to +80 ºC -40 ºC to +125 ºC
PROTECTION Short-circuit protection RECOMMENDED SYSTEM CAPACITANCE Input capacitance Output capacitance (See Note 11) (See Note 11) 270 µF/20 mΩ esr max. 680 µF/10 mΩ esr max. Hiccup, non-latching
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. E139421 UL60950 File No. E139421 TÜV Product Service (EN60950) Certificate No. B 04 08 19870 228 CB report and certificate to IEC60950
File Name: sil06c.pdf Rev (02): 16 Dec 2005
SIL06C Series
DC-DC CONVERTERS C Class Non-isolated
OUTPUT POWER (MAX.) 20 W 30 W INPUT VOLTAGE 4.5-5.5 Vdc 10.2-13.8 Vdc OVP N/A N/A
5 Vin and 12 Vin single output
2 NEW Product
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OUTPUT OUTPUT CURRENT VOLTAGE(12) (MIN.) 0.9-3.3 Vdc 0.9-5.0 Vdc 0A 0A OUTPUT CURRENT (MAX.) 6A 6A
EFFICIENCY (TYP.) 89% 91%
REGULATION LINE ±0.2% ±0.2% LOAD ±0.5% ±0.5%
MODEL NUMBER (5,13,14,15) SIL06C-05SADJ-VJ SIL06C-12SADJ-VJ
Part Number System with Options
SIL06C-12SADJ-VJ
Packaging Options (14) J = Pb-free (RoHS 6/6 compliant) Mounting Option V = Vertical Mount H = Horizontal Mount Number of Outputs SADJ = Single Adjustable Output Input Voltage 05 = 4.5 Vdc to 5.5 Vdc 12 = 10.2 Vdc to 13.8 Vdc Output Voltage Adjustment of the SIL06C Series
The ultra-wide output voltage trim range offers major advantages to users who select the SIL06C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SIL06C series converter leaves the factory the output has been adjusted to the default voltage of 0.9 V
Product Family SIL = Single in Line Rated Output Current 06 = 6 Amps Performance C = Cost Optimised
Notes
1 2 3 di/dt = 10 A/µs, Vin = Nom, Tc = 25 °C, load change = 0.5 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. Measured with external filter. See Application Note 131 for details. Power up is the time from application of dc input to Power Good enabled. Remote ON/OFF is from ON/OFF asserted high to Power.