DC-DC / Non-Isolated
Embedded Power for Business-Critical Continuity
SXX06E
Rev. 08.01.06
Page 1 of 2
LDO06C Series
30 Watts
Total Power:...
Description
Embedded Power for Business-Critical Continuity
SXX06E
Rev. 08.01.06
Page 1 of 2
LDO06C Series
30 Watts
Total Power: 30 Watts Input Voltage: 3-13.8 Vdc No. of Outputs: Single
Rev. 09.03.08 LDO06C 1 of 4
Electrical Specifications
Output
Output voltage Output setpoint accuracy Line regulation Load regulation Min./max. load Overshoot Undershoot Load transient response Ripple and noise 5 Hz to 20 MHz Transient response At turn-on At turn-off 2.5 A/μs See Note 1 See Notes 1, 2 See Note 5 0.1% trim resistors Low line to high line Full load to min. load 0.59-5.1 V ±1.0% ±0.2% ±0.5% 0 A/6 A 0.5% max. 100 mV max. 200 mV deviation 25 μs settling time 20 mV Vin=5 V, Vout=2.5 V 130 mV max. deviation 15 μs recovery to within regulation band 3-13.8 Vdc Minimum load Remote OFF See Note 3 Power up Remote ON/OFF Vin=5 V, Vo=2.5 V, lo=6 A Fixed 50 mA 5 mA 6 A @ lo max. 3 ms 2 ms 92% 620 kHz UL94V-0 1.899 g (0.067 oz.) 12 V @ 40 °C, 100% load Bellcore 332 Surface mount models 8,220,210 hours 150μm
Special Features
6 A output current rating Input voltage range: 3-13.8 Vdc Adjustable out voltage: 0.59-5.1 V Optional factory setting with power good option Excellent transient response Power enable Minimum airflow Small package Termination voltage capability RoHS compliant
Input
Input voltage range Input current Input current (max.) Start-up time
General
Efficiency (high input) Switching frequency Material flammability Weight MTBF
Safety
UL, cUL 60950-1 TÜV Product Serv...
Similar Datasheet