DCH2-050EU-0001

Embedded Power for Business-Critical Continuity DCH2 Series 2 Watts Total Power: Input Voltage: # of Outputs: 2 Watts 90-264 VAC Single Rev. 6.30.09_24 DCH2 Series  of 3 Special Features Switching wallmount power supply Available in multiple AC plug configurations CE Mark EMC & LVD Universal AC input Overload and short circu­it protection Constant voltage, constant current output Built in EMI filter (CISPR 22 Class B) No load power consumption < 300 mW Electrical Specifications Input Input ra­nge: Frequency: EMI/RFI: Safety ground leakage current: 90-264 VAC (wide range) 47-63 Hz FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B & EMC89/336/EEC 10µa @ 50/60 Hz, 230 VAC input 6.5 V (6.5 V - 10 V) 2W 12 ms. typical at full load @ 115 VAC 25% above nominal output maximum (?) Latching type Output short circuit protection auto recover Overload protected > 2 A DC cable with 2.8 mm x 5.5 mm barrel plug right angle DC plug center +V; DC plug outer -V Output Voltage (Vo): Maximum Power (Po): Hold-up time: Overvoltage protection: Overload protection: Output cable/ connector barrel polarity: Environmental Specifications Operating temperature: Storage temperature: Electromagnetic susceptibility: Humidity: Vibration: 0° to 45 °C ambient -30 °C to +85 °C Safety UL 60950 / 6500 CSA 60950 TUV 60950 NEMKO 60950 CB Certificate and report CE EMC & LVD Designed to meet EN55082-1 Operating; non-condensing 20% to 90% RH Per IEC 600...