Programmable Oscillator
SiT8002
www.DataSheet4U.com
1 to 125 MHz Programmable Oscillator
Features
• ±60 ps Peak-Peak Period Jitter • Wide frequ...
Description
SiT8002
www.DataSheet4U.com
1 to 125 MHz Programmable Oscillator
Features
±60 ps Peak-Peak Period Jitter Wide frequency range 1 MHz to 125 MHz Low frequency tolerance ±50 ppm or ±100 ppm Operating voltage 1.8V or 2.5 or 3.3 V 2.25V to 3.6V (contact factory) Operating temperature range: Industrial, -40°C to 85°C Extended Commercial, -20°C to 70°C Small footprint 2.5 x 2.0 x 0.85 mm 3.2 x 2.5 x 0.85 mm 5.0 x 3.2 x 0.85 mm 7.0 x 5.0 x 0.85 mm All packages are Pb-free and ROHs compliant (QFN SMD) Ultra-reliable start up and greater immunity from interference High drive option: 30pF load (contact factory)
Benefits
No crystal or capacitors required Eliminates crystal qualification time 50% + board saving space More cost effective than Quartz oscillators, Quartz crystals and Clock ICs. completely quartz-free
Applications
Consumer Electronics Set Top Box, HDTV, DVR Office Automation: Scanners, Printers, Copiers Automotive Applications Industrial Applications: Interface Controllers, Graphics Cards.
Block Diagram
VDD OUT
Pinout
M EM S R eson ator
F req uency S ynthesizer
GND
2
SiT8002
ST/OE
1
4
VDD
3
OUT
S T/O E
GND
Pin Description
Pin No. Name 1 2 3 4 ST/OE GND OUT VDD Pin Description Standby/ Output Enable Connect to Ground 1 to 125 MHz Programmed Clock output Connect to 1.8V or 2.5V or 3.3V
Pin1
Pin #1 Functionality
OE
H or Open; specified frequency output L: output is high impedance
ST
H or Open; specif...
Similar Datasheet