Document
www.DataSheet4U.com
okpac Relais statique monophasé de puissance Power Solid State Relay
S/MON/SO843070/B/01/03/2005
page 1 / 6F/GB
SO843070
Output : 12-275VAC 35A Input : 3-32VDC
❏ Relais statique synchrone adapté à la plupart des charges Zero Cross Solid State Relay designed for most types of loads. ❏ Sortie thyristors technologie TMS2 (*) permettant une longue durée de vie : 12 à 275VAC 35A. Back to back thyristors on output with TMS2 (*) technology for a long lifetime expectancy : 12 to 275VAC 35A. ❏ Protection en tension sur l'entrée (transil) et sur la sortie (VDR) pour une très haute immunité aux perturbations selon IEC/EN61000-4-4 & IEC/EN61000-4-5. Over-Voltage protection on input (transil) and output (VDR) to have a high immunity according IEC/EN61000-4-4 & IEC/EN61000-4-5 ❏ Très faible niveau de synchronisme Very low zero cross voltage. ❏ Large plage de contrôle: 3 - 32VDC avec un courant de commande régulé. LED de visualisation sur l'entrée de couleur verte. Large control range: 3-32VDC with input current limiter. Green LED visualization on the input. ❏ Construit en conformité aux normes EN60947-4-3 (IEC947-4-3) et EN60950/VDE0805 (Isolement renforcé) -UL-cUL Designed in conformity with EN60947-4-3 (IEC947-4-3) and EN60950/VDE0805 (Reinforced Insulation) -UL-cUL ❏ Protection IP20 par volets sur les bornes. IP20 protection by flaps on terminals. Dimensions :
IP20
12-275VAC protection réseau line protection
-
4/A2ZC
1/L1
Entrée control 3-32VDC
2/T1
+ 3/A1+
LED
- 1/L1 et 2/T1 peuvent être inversées. 1/L1 and 2/T1 can be ê swapped. * 1/L1 et 2/T2 peuvent tre inversées/ -1/L1 Le relais être mont é sur dissipateur thermique. and doit 2/T2 can be changed SSR must beêmounted on heatsink * le relais doit tre monté sur dissipateur thermique / SSR must be mounted on a heatsink
CHARGE/LOAD
Application typique / Typical application: 7kW resistance (AC-51) - 230 VAC 50hz Autres charges : voir page 5 Other loads : see page 5
(*) : Thermo Mechanical Stress Solution
Proud to serve you
All technical caracteristics are subject to change without previous notice. Caractéristiques sujettes à modifications sans préavis.
r
celduc
e l a i
s
www.DataSheet4U.com
okpac
Min 3 <10 2 DC Typ Max 5-12-24 32 <13 <13 verte / green 32 36 2kV 2KV Unit V mA V V V
S/MON/SO843070/B/01/03/2005
page 2 / 6F/GB
Input : Ic = f( Uc)
14 12 10
Caractéristiques d'entrée / Control characteristics (at 25°C) Paramètre / Parameter Symbol Tension de commande / Control voltage Uc Courant de commande / Control current (@ Uc ) Ic Tension de non fonctionnement / Release voltage Uc off LED d'entrée / Input LED Tension Inverse / Reverse voltage Urv Tension de transil d'entrée / Clamping voltage (Transil) Uclamp Immunité / Input immunity : EN61000-4-4 Immunité / Input immunity : EN61000-4-5
Ic (mA)
8 6 4 2 0 0 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32
Uc (VDc)
Caractéristiques de sortie / Output characteristics (at 25°C) Paramètre / Parameter Conditions Symb.