Document
Data Sheet
4.5 Ω RON, 4-/8-Channel ±5 V, +12 V, +5 V, and +3.3 V Multiplexers
ADG1608/ADG1609
FEATURES
4.5 Ω typical on resistance 1 Ω on-resistance flatness Up to 470 mA continuous current ±3.3 V to ±8 V dual-supply operation 3.3 V to 16 V single-supply operation No VL supply required 3 V logic-compatible inputs Rail-to-rail operation 16-lead TSSOP and 16-lead, 3 mm × 3 mm LFCSP
APPLICATIONS
Communication systems Medical systems Audio signal routing Video signal routing Automatic test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Relay replacements
FUNCTIONAL BLOCK DIAGRAMS
ADG1608
S1
D
S8 1-OF-8
DECODER
A0 A1 A2 EN
Figure 1.
ADG1609
S1A DA
S4A
S1B DB
S4B 1-OF-4
DECODER
08318-001
08318-002
GENERAL DESCRIPTION
The ADG1608/ADG1609 are monolithic CMOS analog multiplexers comprising eight single channels and four differential channels, respectively. The ADG1608 switches one of eight inputs to a common output, as determined by the 3-bit binary address lines, A0, A1, and A2. The ADG1609 switches one of four differential inputs to a common differential output, as determined by the 2-bit binary address lines, A0 and A1. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched off.
Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. In the off condition, signal levels up to the supplies are blocked. All switches exhibit break-before-make switching action. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.
A0 A1 EN
Figure 2.
The low on resistance of these switches make them ideal solutions for data acquisition and gain switching applications where low on resistance and distortion is critical. The on-resistance profile is very flat over the full analog input range, ensuring excellent linearity and low distortion when switching audio signals.
CMOS construction ensures ultralow power dissipation, making the parts ideally suited for portable and battery-powered instruments.
PRODUCT HIGHLIGHTS
1. 8 Ω maximum on resistance over temperature. 2. Minimum distortion: THD + N = 0.04% 3. 3 V logic-compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V. 4. No VL logic power supply required. 5. Ultralow power dissipation: <8 nW. 6. 16-lead TSSOP and 16-lead, 3 mm × 3 mm LFCSP.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel:.