www.DataSheet4U.com
L5980
0.7A step-down switching regulator
Features
0.7A DC output current 2.9V ...
www.DataSheet4U.com
L5980
0.7A step-down switching
regulator
Features
0.7A DC output current 2.9V to 18V input voltage Output voltage adjustable from 0.6V 250kHz switching frequency, programmable up to 1MHz Internal soft-start and inhibit Low dropout operation: 100% duty cycle Voltage feed-forward Zero load current operation Over current and thermal protection VQFN3x3-8L package VFQFPN8 3x3
Description
The L5980 is step down switching
regulator with 1A current limited embedded power MOSFET, so it is able to deliver in excess of 0.7A DC current to the load depending on the application condition. The input voltage can range from 2.9V to 18V, while the output voltage can be set starting from 0.6V to VIN. Having a minimum input voltage of 2.9V, the device is suitable also for 3.3V bus. Requiring a minimum set of external components, the device includes an internal 250kHz switching frequency oscillator that can be externally adjusted up to 1MHz. The QFN package with exposed pad allows reducing the RthJA down to approximately 60°C/W.
Applications
Consumer: STB, DVD, DVD recorder, car audio, LCD TV and monitors Industrial: Chargers, car battery, PLD, PLA, FPGA Networking: XDSL, modems, DC-DC modules Computer: Optical storage, hard disk drive, printers, audio/graphic cards Application circuit
Figure 1.
October 2007
Rev 2
1/37
www.st.com 37
www.DataSheet4U.com
Contents
L5980
Contents
1 Pin settings . . . . . . . . . . . . . . . . . . . . . . ....