Horizontal Digital Image Filter
LF3320
DEVICES INCORPORATED
Horizontal Digital Image Filter
LF3320
DEVICES INCORPORATED
Horizontal Digital Image Fil...
Description
LF3320
DEVICES INCORPORATED
Horizontal Digital Image Filter
LF3320
DEVICES INCORPORATED
Horizontal Digital Image Filter
DESCRIPTION
The LF3320 filters digital images in the horizontal dimension at real-time video rates. The input and coefficient data are both 12 bits and in two’s complement format. The output is also in two’s complement format and may be rounded to 16 bits. The LF3320 is designed to take advantage of symmetric coefficient sets. When symmetric coefficient sets are used, the device can be configured as a single 32-tap FIR filter or as two separate 16-tap FIR filters. When asymmetric coefficient sets are used, the device can be configured as a single 16-tap FIR filter or as two separate 8-tap FIR filters. Multiple LF3320s can be cascaded to create larger filters. Interleave/Decimation Registers (I/D Registers) allow interleaved data to be fed directly into the device and filtered without separating the data into individual data streams. The LF3320 can handle a maximum of sixteen data sets interleaved together. The I/D Registers and on-chip accumulators facilitate using decimation to increase the number of filter taps. Decimation of up to 16:1 is supported. The LF3320 contains enough on-board memory to store 256 coefficient sets. Two separate LF InterfacesTM allow all 256 coefficient sets to be updated within vertical blanking.
FEATURES
❑ 83 MHz Data Rate ❑ 12-bit Data or Coefficients (Expandable to 24-bit) ❑ 32-Tap FIR Filter, Cascadable for More Filter Tap...
Similar Datasheet