12V MOSFET Driver
www.DataSheet4U.com
Dual Bootstrapped, 12 V MOSFET Driver with Output Disable ADP3110
GENERAL DESCRIPTION
The ADP3110 i...
Description
www.DataSheet4U.com
Dual Bootstrapped, 12 V MOSFET Driver with Output Disable ADP3110
GENERAL DESCRIPTION
The ADP3110 is a dual, high voltage MOSFET driver optimized for driving two N-channel MOSFETs, which are the two switches in a nonisolated synchronous buck power converter. Each of the drivers is capable of driving a 3000 pF load with a 25 ns propagation delay and a 30 ns transition time. One of the drivers can be bootstrapped and is designed to handle the high voltage slew rate associated with floating high-side gate drivers. The ADP3110 includes overlapping drive protection to prevent shoot-through current in the external MOSFETs. The OD pin shuts off both the high-side and the low-side MOSFETs to prevent rapid output capacitor discharge during system shutdown. The ADP3110 is specified over the commercial temperature range of 0°C to 85°C and is available in an 8-lead SOIC_N package.
FEATURES
All-in-one synchronous buck driver Bootstrapped high-side drive One PWM signal generates both drives Anticross-conduction protection circuitry Output disable control turns off both MOSFETs to float output per Intel® VRM 10 specification
APPLICATIONS
Multiphase desktop CPU supplies Single-supply synchronous buck converters
SIMPLIFIED FUNCTIONAL BLOCK DIAGRAM
12V
VCC
4
D1
ADP3110
BST
1
CBST2 CBST1
IN 2
8
DRVH
RG Q1 RBST
DELAY
TO INDUCTOR
SW
7
CMP
VCC 6
CMP 1V CONTROL LOGIC DRVL
5
Q2
DELAY OD 3
PGND
05514-001
6
Figure 1.
Rev. 0
Information furnished by Analog De...
Similar Datasheet