ALN50-1000AT

plerowTM ALN50-1000AT www.DataSheet4U.com Internally Matched LNA Module Description The plerowTM ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability factor is always kept more than unity over the application band in order to ensure its unconditionally stable implementation to the application system environment. The surface-mount module package including the completed matching circuit and other components necessary just in case allows very simple and convenient implementation onto the system board in mass production level. Features · 16 dB Gain at 50 MHz · 15.5 dB Gain at 1000 MHz · 2.2 dB NF(max) over frequency · 21 dBm P1dB, 40 dBm OIP3 @ 5V / 90mA · - µsec Swtiching Time(max) Specifications Parameter Frequency Range Gain Gain Flatness Noise Figure Output IP3 (1) S11 / S22 (2) Output P1dB Switching Time Supply Current Supply Voltage Impedance Max. RF Input Power Package Type & Size (3) @ T = 25°C, VCC = 5 V, Freq. = 50 ~ 1000 MHz, 75 ohm Unit Specifications Min Typ 50 ~ 300 15 16 ± 0.1 ± 0.15 1-stage Single Type Max Min Typ 300 ~ 600 Max Min Typ 600 ~ 1000 Max MHz dB dB dB dBm dB dBm sec mA V Ω dBm mm 20 38 15 16 ±...