DatasheetsPDF.com

ALN1810M3 Dataheets PDF



Part Number ALN1810M3
Manufacturers Advanced Semiconductor
Logo Advanced Semiconductor
Description Internally Matched LNA Module
Datasheet ALN1810M3 DatasheetALN1810M3 Datasheet (PDF)

plerowTM ALN1810M3 www.DataSheet4U.com Internally Matched LNA Module Description The plerowTM ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability fac.

  ALN1810M3   ALN1810M3


Document
plerowTM ALN1810M3 www.DataSheet4U.com Internally Matched LNA Module Description The plerowTM ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability factor is always kept more than unity over the application band in order to ensure its unconditionally stable implementation to the application system environment. The surface-mount module package including the completed matching circuit and other components necessary just in case allows very simple and convenient implementation onto the system board in mass production level. Features · S21 = 36.6 dB @ 1710 MHz = 35.4 dB @ 1910 MHz · NF of 0.7 dB over Frequency · Unconditionally Stable · Single 5V Supply · High OIP3 @ Low Current Specifications (in Production) Typ. @ T = 25°C, Vs = 5 V, Freq. = 1810 MHz, Zo.sys = 50 ohm Parameter Frequency Range Gain Gain Flatness Noise Figure (NF) Output IP3 S11 / S22 (1) (2) Unit MHz dB dB dB dBm DB dBm Specifications Min 1710 35 36 ± 0.6 0.70 41 27 42 -20 / -20 28 400 5 50 C.W 29 ~ 31 (before fail) Surface Mount Type, 25Wx13Lx3.8H 430 ± 0.8 0.80 Typ Max 1910 3-stage Single Type More Information Website: www.asb.co.kr E-mail: [email protected] Tel: (82) 42-528-7223 Fax: (82) 42-528-7222 ASB Inc., 4th Fl. Venture Town Bldg., 367-17 Goijeong-Dong, Seo-Gu, Daejon 302-716, Korea Output P1dB Switching Time Supply Current Supply Voltage Impedance Max. RF Input Power Package Type & Size (3) µsec mA V Ω dBm mm Operating temperature is -40°C to +85°C. 1) OIP3 is measured with two tones at an output power of 10 dBm / tone separated by 1 MHz. 2) S11/S22 (max) is the worst value within the frequency band. 3) Switching time means the time that takes for output power to get stabilized to its final level after switching DC voltage from 0 V to VS. Outline Drawing (Unit: mm) ALN1810M3 plerow (Top View) Pin Number 3 8 10 Others (Bottom View) Function RF In RF Out +Vcc Ground Solder Stencil Area Note: 1. The number and size of ground via holes in a circuit board is critical for thermal RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of all ground pins for better RF and thermal performance, as shown in the drawing at the left side. (Side View) Ø0.4 plated thru holes to ground plane 1/4 (Recommended Footprint) www.asb.co.kr November 2008 plerowTM ALN1810M3 www.DataSheet4U.com Internally Matched LNA Module S-parameters Typical Performance (Measured) 1710~1910 +5 V Stability Factor (K) Noise Figure OIP3 P1dB 2/4 www.asb.co.kr November 2008 plerowTM ALN1810M3 www.DataSheet4U.com Internally Matched LNA Module RF Performance with Voltage Change Item Voltage 4.5 4.6 4.7 4.8 4.9 5.0 5.1 5.2 5.3 5.4 5.5 S11 (dB) -20.4 -21.1 -21.4 -22.1 -22.3 -22.7 -22.9 -23.2 -23.5 -23.6 -23.7 S22 (dB) -25.1 -24.2 -24.2 -24.0 -23.9 -23.8 -23.7 -23.6 -23.6 -23.5 -23.4 S21 (dB) 35.18 35.37 35.49 35.56 35.63 35.67 35.70 35.75 35.73 35.70 35.66 G/F (dB) 1.24 1.25 1.26 1.27 12.8 1.29 1.29 1.30 1.29 1.29 1.29 NF (dB) 0.692 0.694 0.692 0.693 0.699 0.699 0.704 0.709 0.716 0.720 0.726 P1dB (dBm) 26.4 26.9 27.2 27.6 27.9 28.1 28.4 28.5 28.7 28.8 28.9 OIP3 (dBm) 40.2 41.2 41.8 42.0 42.4 42.5 42.4 42.4 42.4 42.3 42.2 Current (mA) 267 292 313 336 356 376 395 412 427 442 456 Note: tested at 25oC. S11, S22, NF are the worst value over frequency, 1710~1910 MHz. S21, P1dB, and OIP3 are measured at the center frequency, 1810 MHz. RF Performance with Operating Temperature Item Temp. - 40°C - 20°C 0°C 25°C 40°C 60°C 80°C 100°C S11 (dB) -22.9 -23.4 -23.7 -23.9 -24.0 -23.6 -23.7 -23.5 S22 (dB) -18.9 -19.3 -20.0 -20.8 -20.8 -21.4 -21.9 -22.6 S21 (dB) 37.34 37.09 36.70 36.33 36.10 35.74 35.32 34.96 G/F (dB) 1.14 1.13 1.12 1.12 1.11 1.10 1.09 1.09 NF (dB) 0.437 0.525 0.596 0.700 0.755 0.835 0.899 1.010 P1dB (dBm) 29.1 29.0 28.8 28.6 28.3 28.0 27.5 27.1 OIP3 (dBm) 45.6 44.7 43.6 42.2 41.5 40.8 40.0 39.2 Current (mA) 384 387 389 390 390 387 382 373 Note: tested at 5.0 V. S11, S22, NF are the worst value over frequency, 1710~1910 MHz. S21, P1dB, and OIP3 are measured at the center frequency, 1810 MHz. 3/4 www.asb.co.kr November 2008 plerowTM ALN1810M3 www.DataSheet4U.com Internally Matched LNA Module Application Circuit V DC + - Tantal Capacitor IN C1 ALN C2 OUT 1) The tantal capacitor is optional and for bypassing the AC noise introduced from the DC supply. The capacitance value may be determined by customer’s DC supply status. 2) So-called DC blocking capacitors are always necessarily placed at the input and output port for allowing only the RF signal to pass and blocking the DC component in the signal. The DC blocking capacitors are included inside the LNA mod.


ALN1810BT ALN1810M3 ALN1811


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)