DatasheetsPDF.com

NJG1600HB6 Dataheets PDF



Part Number NJG1600HB6
Manufacturers JRC
Logo JRC
Description SPDT SWITCH GaAs MMIC / USB8-B6
Datasheet NJG1600HB6 DatasheetNJG1600HB6 Datasheet (PDF)

NJG1600HB6 www.DataSheet4U.com SPDT SWITCH GaAs MMIC Q GENERAL DESCRIPTION NJG1600HB6 is a GaAs SPDT switch IC that features small-sized package and low insertion loss , and ideally suited for T/R switch of W-LAN or other digital wireless systems. The ultra small & ultra thin USB8-B6 package is adopted. Q FEATURES OLow insertion loss OHigh isolation OPin at 1dB compression point OLow control current OUltra small & ultra thin package Q PIN CONFIGURATION USB8-B3 Type (TOP VIEW) 8 1 7 Q PACKAGE O.

  NJG1600HB6   NJG1600HB6


Document
NJG1600HB6 www.DataSheet4U.com SPDT SWITCH GaAs MMIC Q GENERAL DESCRIPTION NJG1600HB6 is a GaAs SPDT switch IC that features small-sized package and low insertion loss , and ideally suited for T/R switch of W-LAN or other digital wireless systems. The ultra small & ultra thin USB8-B6 package is adopted. Q FEATURES OLow insertion loss OHigh isolation OPin at 1dB compression point OLow control current OUltra small & ultra thin package Q PIN CONFIGURATION USB8-B3 Type (TOP VIEW) 8 1 7 Q PACKAGE OUTLINE NJG1600HB6 0.45dB typ. @f=2.0GHz 0.5dB typ. @f=2.5GHz 20dB typ. @f=2.0GHz 18dB typ. @f=2.5GHz 27dBm typ. @f=2.5GHz 15uA typ. USB8-B6 (Package size: 1.5x1.5x0.55mm) 2 6 3 4 5 Pin connection 1.P1 2.GND 3.P2 4.GND 5.VCTL2 6.PC 7.VCTL1 8.GND Q TRUTH TABLE “H”=VCTL (H), “L”=VCTL (L) VCTL1 VCTL2 PC-P1 PC-P2 H L OFF ON L H ON OFF Note: Reversed logic version of this device is NJG1542HB3. -1- NJG1600HB6 www.DataSheet4U.com Q ABSOLUTE MAXIMUM RATINGS PARAMETER RF Input Power Control Voltage Operating Temp. Storage Temp. SYMBOL PIN VCTL Topr Tstg CONDITIONS VCTL=0V/3V VCTL terminal CONDITIONS 29 7.5 -40~+85 -55~+150 UNITS dBm V °C °C Q ELECTRICAL CHARACTERISTICS (General conditions: VCTL (L)=0V, VCTL (H)=3V, ZS=Zl=50Ω, Ta=25°C) PARAMETERS SYMBOL CONDITIONS MIN TYP 3.0 15 0.45 0.5 20 18 27 1.2 20 MAX 0.2 6.5 30 0.6 0.65 1.4 100 UNITS V V uA dB dB dB dB dBm Control Voltage (LOW) Control Voltage (HIGH) Control Current Insertion Loss 1 Insertion Loss 2 Isolation 1 Isolation 2 Pin at 1dB Compression Point 2 VSWR Switching time VCTL (L) VCTL (H) ICTL LOSS1 LOSS2 ISL1 ISL2 P-1dB VSWR TSW f=2.5GHz, PIN=18dBm f=2.0GHz, PIN=18dBm f=2.5GHz, PIN=18dBm f=2.0GHz, PIN=18dBm f=2.5GHz, PIN=18dBm f=2.5GHz f=0.1~2.5GHz, ON state f=0.1~2.5GHz -0.2 2.5 17 15 25 - ns -2- NJG1600HB6 www.DataSheet4U.com QTERMINAL INFORMATION No. 1 SYMBOL P1 2 GND 3 P2 4 GND 5 VCTL2 6 PC 7 VCTL1 8 GND DESCRIPTION RF port. This port is connected with PC port by controlling 5th pin (VCTL(H)) to 2.5~6.5V and 7th pin(VCTL(L)) to -0.2~+0.2V. An external capacitor is required to block the DC bias voltage of internal circuit. (100MHz: 0.01uF, 0.1~0.5GHz: 1000pF, 0.5~2.5GHz: 56pF) Ground terminal. Please connect this terminal with ground plane as close as possible for excellent RF performance. RF port. This port is connected with PC port by controlling 7th pin (VCTL (H)) to 2.5~6.5V and 5th pin (VCTL(L)) to -0.2~+0.2V. An external capacitor is required to block the DC bias voltage of internal circuit. (100MHz: 0.01uF, 0.1~0.5GHz: 1000pF, 0.5~2.5GHz: 56pF) Ground terminal. Please connect this terminal with ground plane as close as possible for excellent RF performance. Control port 2. The voltage of this port controls PC to P2 state. The ‘ON’ and ‘OFF’ state is toggled by controlling voltage of this terminal such as high-state (2.5~6.5V) or low-state (-0.2~+0.2V). The voltage of 7th pin have to be set to opposite state. The bypass capacitor has to be chosen to reduce switching time delay from 10pF~1000pF range. Common RF port. In order to block the DC bias voltage of internal circuit, an external capacitor is required. (100MHz:0.01uF, 0.1~0.5GHz: 1000pF, 0.5~2.5GHz: 56pF) Control port 1. The voltage of this port controls PC to P1 state. The ‘ON’ and ‘OFF’ state is toggled by controlling voltage of this terminal such as high-state (2.5~6.5V) or low-state (-0.2~+0.2V). The voltage of 5th pin have to be set to opposite state. The bypass capacitor has to be chosen to reduce switching time delay from 10pF~1000pF range. Ground terminal. Please connect this terminal with ground plane as close as possible for excellent RF performance. -3- NJG1600HB6 www.DataSheet4U.com Q ELECTRICAL CHARACTERISTICS (0.1~3.0GHz, with application circuit, without DC Blocking Capacitor, Losses of external circuit are excluded) PC-P1 Insertion Loss vs. Frequency (PC-P1 ON, VCTL=3.0V/0V, Pin=-10dBm) 0.0 0.0 PC-P2 Insertion Loss vs. Frequency (PC-P2 ON, VCTL=3.0V/0V, Pin=-10dBm) Insertion Loss (dB) -0.5 Insertion Loss (dB) 0.5 1.0 1.5 2.0 2.5 3.0 -0.5 -1.0 -1.0 -1.5 -1.5 -2.0 0.0 -2.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) PC-P1 Isolation vs. Frequency (PC-P2 ON, VCTL=3.0V/0V, Pin=-10dBm) 0 PC-P2 Isolation vs. Frequency (PC-P1 ON, VCTL=3.0V/0V, Pin=-10dBm) 0 -10 -10 Isolation (dB) -20 Isolation (dB) 0.5 1.0 1.5 2.0 2.5 3.0 -20 -30 -30 -40 -40 -50 0.0 -50 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) PC-P1 VSWR vs. Frequency (VCTL=3.0V/0V,P1 port) 2.0 2.0 PC-P2 VSWR vs. Frequency (VCTL=3.0V/0V,P2 port) 1.8 1.8 VSWR 1.4 VSWR 0.5 1.0 1.5 2.0 2.5 3.0 1.6 1.6 1.4 1.2 1.2 1.0 0.0 1.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) -4- NJG1600HB6 www.DataSheet4U.com Q ELECTRICAL CHARACTERISTICS (Application circuit (Parts list 2)) PC-P1 Insertion Loss vs. Input Power (PC-P1 ON, f=2.5GHz) 0.0 PC-P1 Output Power, ICTL vs. Input Power (PC-P1 ON, f=2.5GHz) .


NJG1606HB6 NJG1600HB6 NJG1560PB1


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)