S-AV33A

S-AV33A TOSHIBA RF POWER AMPLIFIER MODULE S-AV33A FM RF POWER AMPLIFIER MODULE FOR 32W COMMERCIAL VHF RADIO APPLICATIONS www.datasheet4u.com ･Power Gain: 28 dB (Min.) ･Total Efficiency: 45% (Min.) ABSOLUTE MAXIMUM RATINGS (Tc = 25°C, IT < 10 A, ZG = ZL = 50Ω) CHARACTERISTICS Maximum Current Power Supply Voltage Control Voltage Instantaneous Output Power Input Power Operating Case Temperature Storage Temperature SYMBOL IT VDD VGG Pomax Pi Tc (opr) Tstg VGG = 0 V (GND), RF: none 10.5 ≤ VDD ≤ 16.5 V, Pi = 50 mW VGG ≤ 5.5 V, Pi = 50 mW, 10.5 ≤ VDD ≤ 16.5V, within 2 seconds 10.5 ≤ VDD ≤ 16.5 V, VGG ≤ 5.5 V 10.5 ≤ VDD ≤ 16.5 V, VGG ≤ 5.5 V, Pi = 50 mW (Note 2) TEST CONDITION RATING 10 16.5 5.5 40 100 -30 to 100 -40 to 110 UNIT A V V W mW °C °C Note 1: The maximum ratings are the limits that must not be exceeded even for an instant, under worst possible conditions. Exceeding the ratings may cause device damage, ignition, or deterioration. Therefore, when designing the circuitry, derating factors should be applied so that the absolute maximum ratings are not exceeded. Note 2: The output power rating satisfies the range shown in Figures 1 and 2 according to the operating case temperature. Ensure that the device should be operated within the specified operating range. The figures below indicate the output power obtained 2 seconds after Po is generated. Pomax-Tc 40 35 30 PDmax-Tc 100 90 80 70 PDmax(W) 60 50 40 30 Pomax(W) 25 20 15 10 5 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 10...