MAX8830

19-0782; Rev 0; 4/07 LED Light Management IC in 2.5mm x 2.5mm UCSP www.datasheet4u.com General Description Features ♦ Step-Up DC-DC Converter 280mA Guaranteed Output Current Over 90% Efficiency On-Chip FET and Synchronous Rectifier Fixed 1MHz PWM Switching Small 2.2µH to 10µH Inductor I2C-Programmable VOUT (3.8V to 5.2V and Off in 16 Steps) ♦ Flash LED Current Sink I2C-Programmable Flash Output Current (Off to 200mA in 16 Steps) I2C-Programmable Flash Maximum Timer (0.5s, 1.0s, 1.5s, or 2.0s) I2C-Programmable Movie Output Current (Off to 200mA in 16 Steps) Movie Enabled by I2C or Logic Input Flash Enabled by Logic Input Low Dropout (75mV typ) ♦ Four LED Current Sinks Individually I2C-Programmable Output Current Off to 10mA in 32 Steps Low LED Sink Current Dropout Voltage (30mV typ) ♦ I2C Interface Write Address (0x94), Read Address (0x95) Individual On/Off and LED Current Settings Simple Register Mapping ♦ < 1µA Shutdown Current ♦ Open/Short LED Detection ♦ Thermal-Shutdown Protection ♦ 16-Bump, 2.5mm x 2.5mm UCSP Package MAX8830 The MAX8830 light management IC integrates a 280mA PWM DC-DC step-up converter, a 200mA white LED camera flash current sink, and four programmable LED current sinks. The internal 1MHz step-up converter features an internal switching MOSFET and synchronous rectifier to improve efficiency and minimize external component count. The camera flash output current and maximum timer is programmable through I2C. Each LED current is individually regulated ...