AT-CUT LOW COST CERAMIC SMD CRYSTAL
AT-CUT LOW COST CERAMIC SMD CRYSTAL
ABM75CA
FEATURES: • Industrial standard package 7.0x5.0, 2 pads • Ideal for Cost Sen...
Description
AT-CUT LOW COST CERAMIC SMD CRYSTAL
ABM75CA
FEATURES: Industrial standard package 7.0x5.0, 2 pads Ideal for Cost Sensitive Commercial Electronics Suitable for High Volume Applications
www.DataSheet4U.com
Pb RoHS Compliant
APPLICATIONS: Laptop computers Computer peripherals Home network modem
7.0 x 5.0 x 1.4 mm
| | | | | | | | | | | | | | |
STANDARD SPECIFICATIONS:
PARAMETERS ABRACON P/N: Frequency range: Operation Mode: Operating temperature: Storage temperature: Freq. Tolerance at +25° C: Freq. stability over operating temperature (Ref to +25° C): Equivalent series resistance: Shunt capacitance C0: Load capacitance CL: Drive Level: Aging @ 25°C per year: Insulation Resistance:
TABLE 1 Frequency (MHz) 7.600 - 11.999 12.000 - 16.000 16.001 - 35.000 35.001 - 48.000
ABM75CA Series 7.6 MHz to 48 MHz AT-cut (Fundamental for <35MHz, 3rd OT for >35MHz) -10°C to + 60°C (see options) -40°C to +85°C ± 30ppm max. (Contact ABRACON for tighter tolerance) ± 50ppm max. (Contact ABRACON for tighter stability) See Table 1 7pF max 18pF (see option) 100uW max ±10ppm max 500Mohms min at 100Vdc ± 15V
ESR (Ω ) 80 60 40
Contact ABRACON
Test Condition Parts shall be tested under the condition of +20±15°C of the temperature, +65%±20%RH of the humidity unless the standard condition of +25±2°C of the temperature, +65%±5%RH of the humidity is specified.
OPTIONS AND PART IDENTIFICATION:
(Left blank if standard)
ABM75CA - Frequency -
-
-
Frequency
XX.XXXX MHz
Operating Temp. E 0°C ...
Similar Datasheet