ISO-CMOS 8 x 8 Analog Switch Array
®
ISO-CMOS MT8808 8 x 8 Analog Switch Array
www.DataSheet4U.com
Features
• • • • • • • • • • Internal control latches...
Description
®
ISO-CMOS MT8808 8 x 8 Analog Switch Array
www.DataSheet4U.com
Features
Internal control latches and address decoder Short set-up and hold times Wide operating voltage: 4.5V to 13.2V 12Vpp analog signal capability R ON 65 Ω max. @ V DD=12V, 25°C ∆R ON ≤ 10 Ω @ V DD=12V, 25°C Full CMOS switch for low distortion Minimum feedthrough and crosstalk Separate analog and digital reference supplies Low power consumption ISO-CMOS technology
ISSUE 2
November 1988
Ordering Information MT8808AC 28 Pin Ceramic DIP MT8808AE 28 Pin Plastic DIP MT8808AP 28 Pin PLCC -40° to 85°C
Description
The Mitel MT8808 is fabricated in MITEL’s ISOCMOS technology providing low power dissipation and high reliability. The device contains a 8 x 8 array of crosspoint switches along with a 6 to 64 line decoder and latch circuits. Any one of the 64 switches can be addressed by selecting the appropriate six address bits. The selected switch can be turned on or off by applying a logical one or zero to the DATA input. VSS is the ground reference of the digital inputs. The range of the analog signal is from VDD to VEE.
Applications
Key systems PBX systems Mobile radio Test equipment /instrumentation Analog/digital multiplexers Audio/Video switching
STROBE
DATA RESET
VDD
VEE
VSS
1 AX0
1
AX1 AX2 AY0 AY1 AY2 64 64
8 x 8 6 to 64 Decoder Latches Switch Array
Xi I/O (i=0-7)
Yi I/O (i=0-7)
Figure 1 - Functional Block Diagram
3-15
MT...
Similar Datasheet