DatasheetsPDF.com

219 Dataheets PDF



Part Number 219
Manufacturers CTS
Logo CTS
Description SMT DIP
Datasheet 219 Datasheet219 Datasheet (PDF)

Series 219 SMT DIP www.DataSheet4U.com ® Surface Mount DIP Switch — Auto Placeable Features Optimized Mechanical Features • Removable tape seal to withstand IR vapor phase or wave soldering temperatures,and board washing • Positive detent separate from contactor • Available low profile, medium, and extended height actuators • Gull-wing and "J" lead terminal configurations • Tube or tape and reel packaging available Optimized Contact System • Redundant, wiping contact • Contactor does not deflec.

  219   219



Document
Series 219 SMT DIP www.DataSheet4U.com ® Surface Mount DIP Switch — Auto Placeable Features Optimized Mechanical Features • Removable tape seal to withstand IR vapor phase or wave soldering temperatures,and board washing • Positive detent separate from contactor • Available low profile, medium, and extended height actuators • Gull-wing and "J" lead terminal configurations • Tube or tape and reel packaging available Optimized Contact System • Redundant, wiping contact • Contactor does not deflect during actuation Premium Materials • Gold plated beryllium copper contacts • All plastic rated UL 94 V-0 • High temperature body and actuator materials • RoHS compliant Electrical and Mechanical Specifications Switch Function SPST- 2 through 10 and 12 positions Switch Contact Resistance 25 milliohms maximum initial 50 milliohms maximum at the end of life Insulation Resistance 1,000 megohms minimum between insulated terminals Dielectric Strength 500 VDC for 1 minute between adjacent switches Nonswitching Rating 100 mA or 50 VDC maximum Switch Capacitance 5 pF maximum between adjacent closed switches Operating Temperature - 55°C to +85°C Actuation Life 2,000 cycles switching 100 mA @ 20 VDC or 0.1 mA @ 5 VDC (dry circuit) Coplanarity 0.10mm (.004") maximum Allowable Solder Time Up to 60 seconds at 260°C Vibration Per MIL-STD-202F, method 204D, condition B (.06" or 15 G’s between 10 HZ to 2K HZ) with no contact inconsistencies greater than 1 microsecond. Shock Per MIL-STD-202F, method 213B, condition A (50 G’s) with no contact inconsistencies greater than 1 microsecond. Sealing Standard bottom seal Optional top tape seal Marking Special marking available consult CTS. Packaging Standard : Anti-static tube packaging Optional : Tape and reel packaging 1-2 CTS Electronic Components © 2008 CTS Corporation. All rights reserved. Information subject to change. www.ctscorp.com 2/12/08 CTS SERIES 219 SMT CONTACT FEATURES www.DataSheet4U.com 1. Value of Redundant (Bifurcated) Gold Plated Contacts: Redundancy dramatically reduces the probability of contact failure while gold contact material provides the highest environmental protection, IMPROVING RELIABILITY. 2. Value of Wiping Contact Action: Clean contact area, IMPROVING RELIABILITY. 3. Value of Contactor Not Deflecting During Actuation: Constant contact pressure eliminates overstressing contacts, IMPROVING RELIABILITY. 4. Value of Detent Separate from Contactor: Separate detent allows optimization of nondeflecting contactor and detent designs, IMPROVING RELIABILITY. 2. Wiping contact action 1. Redundant (bifurcated) gold plated cross radial contactor 3. Contactor does not deflect during actuation 4. Detent separate from contactor "A" Overall Dimension 6.55/.258 9.09/.358 11.63/.458 14.17/.558 16.71/.658 19.25/.758 21.79/.858 24.33/.958 26.87/1.058 31.95/1.258 No. of Switch positions 2 3 4 5 6 7 8 9 10 12 Gull Wing Terminals Medium Height Actuator TRAVEL 0.70 .028 ON 6.70±0.25 3.62 .264±.010 .143 219 CTS 1.0 X45° CHAMFER (2) .039 DATE CODE "J" Bend Terminals Low Profile Actuator 1.0 X45° CHAMFER (2) .039 DATE CODE ON 6.70±0.25 .264±.010 3.62 .143 219 CTS TRAVEL 0.70 .028 1 2 3 4 5 10 11 12 1 2.54 .100 TYP. 2 3 4 5 10 11 12 2.54 .100 TYP. 1.50 .059 TYP. 0.55±0.08 .022±.003 TYP. 1.50 .059 TYP. "A" ±0.30 ±.012 +0.05 3.80 -0.10 .150 +.002 -.004 0.55 .022 SOLDER COATED +0.13 0.25 -0.00 +.005 .010 -.000 8.00 .315 "A" ±0.30 ±.012 8.00 .315 STANDOFF 7.62±0.20 .300±.008 9.91±0.08 .390±.003 1.50 .059 0.55±0.08 .022±.003 3.80 -0.10 .150 +.002 -.004 +0.05 STANDOFF 1.3 .050 0.25±0.10 .010±.004 1.27±0.10 .050±.004 TYP. 8.51 .335 MAX Gull Wing Surface Mount Pad Layouts 2.44 .096 8.60 .339 6.17 .243 11.04 .435 "J" Bend Surface Mount Pad Layouts 4.57 .180 6.73 .265 8.89 .350 2.54 .100 TYP. 1.13 .044 TYP. DIMENSION: mm inch 2.54 .100 TYP. 1.13 .044 TYP. Ordering Information 219 – 12 LP S T J R F XX: NO. OF POSITIONS E: EXTENDED HEIGHT ACTUATOR(0.60mm/.024") M: MEDIUM HEIGHT ACTUATOR(0.25mm/.010") LP: LOW PROFILE ACTUATOR(Flush) BLANK: SHIP AT ON POSITION F: SHIP AT OFF POSITION BLANK : ANTI-STATIC TUBE PACKAGING R: TAPE AND REEL PACKAGING BLANK: GULL-WING TERMINAL J: "J" BEND TERMINAL BLANK: NO TOP TAPE SEAL * T : TOP TAPE SEAL * Not available on extended actuator S: BOTTOM SEAL © 2008 CTS Corporation. All rights reserved. Information subject to change. 2-2 CTS Electronic Components 2/12/08 www.ctscorp.com .


219-xxxx 219 SC1628D


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)