Connector
FLZ CONNECTOR
Emboss Tape
0.5mm pitch/Connectors for FFC and FPC
Specifications –––––––––––––––––––
www.DataSheet4U.c...
Description
FLZ CONNECTOR
Emboss Tape
0.5mm pitch/Connectors for FFC and FPC
Specifications –––––––––––––––––––
www.DataSheet4U.com
HJ ST
This extremely small 0.5mm pitch connector with a height of only 2.0mm above the PCB surface allows interconnection in extremely small spaces and is an example of JST's leading edge technology.
Zero insertion force mechanism Heat resisting design suitable for surface mounting In-line surface mount tails Two types of connections Embossed tape for automatic mounting
Current rating: 0.5A AC, DC Voltage rating: 50V AC, DC Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) Contact resistance: Initial value/40m Ω max. After environmental testing/60m Ω max. Insulation resistance: 800M Ω min. Withstanding voltage: 200V AC/minute Applicable FFC and FPC: Conductor pitch/0.5mm Conductor width/0.35mm Mating part thickness/0.30±0.03mm
Note: FFC and FPC to be actually used should be checked for applicability.
* RoHS compliant products are published. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details.
Standards ––––––––––––––––––––––
1 Certified LR20812
0
Recognized E60389
PC board layout (viewed from component side) and Assembly layout
Inner lock type
Note: 1. Tolerances are non-cumulative: ±0.03mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details.
200
FLZ CONN...
Similar Datasheet