MX29LA129ML

MX29LA129M H/L 128M-BIT SINGLE VOLTAGE 3V ONLY UNIFORM SECTOR FLASH MEMORY FEATURES GENERAL FEATURES Single Power Supply Operation - 2.7 to 3.6 volt for read, erase, and program operations Configuration - 16,777,216 x 8 / 8,388,608 x 16 switchable Sector structure www.DataSheet4U.com - 64KB(32KW) x 256 Latch-up protected to 250mA from -1V to VCC + 1V Low VCC write inhibit is equal to or less than 1.5V Compatible with JEDEC standard - Pin-out and software compatible to single power supply Flash PERFORMANCE High Performance - Fast access time: 90R/100ns - Page read time: 25ns - Sector erase time: 0.5s (typ.) - 4 word/8 byte page read buffer - 16 word/ 32 byte write buffer: reduces programming time for multiple-word/byte updates Low Power Consumption - Active read current: 18mA(typ.) - Active write current: 20mA(typ.) - Standby current: 20uA(typ.) Minimum 100,000 erase/program cycle 20-years data retention SOFTWARE FEATURES Support Common Flash Interface (CFI) - Flash device parameters stored on the device and provide the host system to access. Program Suspend/Program Resume - Suspend program operation to read other sectors Erase Suspend/ Erase Resume - Suspends sector erase operation to read data/program other sectors Status Reply - Data# polling & Toggle bits provide detection of program and erase operation completion HARDWARE FEATURES Ready/Busy (RY/BY#) Output - Provides a hardware method of detecting program and erase operation completion Har...