HIGH TEMPERATURE GaAlAs IR EMITTERS
HIGH TEMPERATURE GaAlAs IR EMITTERS
FEATURES
ANODE (CASE)
OD-880WHT
GLASS .006 HIGH MAX
1.00 MIN. .015
• Extended op...
Description
HIGH TEMPERATURE GaAlAs IR EMITTERS
FEATURES
ANODE (CASE)
OD-880WHT
GLASS .006 HIGH MAX
1.00 MIN. .015
Extended operating temperature range
.209 .220
No internal coatings
No derating or heat sink required to 80°C All surfaces are gold plated. Dimensions are nominal values in inches unless otherwise specified. Window caps are welded to the case.
.183 .152 .187 .156 .017
.100 .041
www.DataSheet4U.com
.098 .112 .143 .150
CATHODE
.036 45°
RoHS
ELECTRO-OPTICAL CHARACTERISTICS AT 25°C
PARAMETERS Total Power Output, Po TEST CONDITIONS IF = 100mA IF = 50mA IF = 100mA IR = 10MA VR = 0V MIN 7 TYP 9 880 80 80 30 17 MAX UNITS mW nm nm
Spectral Bandwidth at 50%, $L Half Intensity Beam Angle, Q Forward Voltage, VF
Peak Emission Wavelength, LP
Capacitance, C Rise Time Fall Time
Reverse Breakdown Voltage, VR
5
1.55
1.9
Volts Volts Msec Msec pF
Deg
0.5 0.5
ABSOLUTE MAXIMUM RATINGS AT 25°C CASE
Continuous Forward Current Reverse Voltage Power Dissipation1 190mW 100mA 5V 3A
Peak Forward Current (10Ms, 300Hz)2
Lead Soldering Temperature (1/16" from case for 10sec)
1Derate per Thermal Derating Curve above 25°C 2Derate linearly above 25°C
260°C
THERMAL PARAMETERS
Storage and Operating Temperature Range Maximum Junction Temperature Thermal Resistance, RTHJA1
-65°C TO 150°C 370°C/W Typical 120°C/W Typical 150°C
1Heat transfer minimized by measuring in still air with minimum heat conducting through leads 2Air circulating at a rapid rate to keep case temperature a...
Similar Datasheet