DatasheetsPDF.com

SHD850001 Dataheets PDF



Part Number SHD850001
Manufacturers Sensitron
Logo Sensitron
Description 6A-Peak Low Side MOSFET Driver Bipolar/CMOS/DMOS Process
Datasheet SHD850001 DatasheetSHD850001 Datasheet (PDF)

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 272, REV. A SHD850001 6A-Peak Low Side MOSFET Driver Bipolar/CMOS/DMOS Process FEATURES: • CMOS Construction • Similar to Industry Part Number MIC4420 • Low Output Impedance, 2.5 Ohms • Latch-Up Protected; Will Withstand > 500 mA Reverse Output Current • Logic Input Withstands Negative Swing of Up to 5V www.DataSheet4U.com MAXIMUM RATINGS RATING Power Dissipation Derating Factors (CerPack) Storage Temperature Lead Temperature (10sec) Supply Vo.

  SHD850001   SHD850001


Document
SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 272, REV. A SHD850001 6A-Peak Low Side MOSFET Driver Bipolar/CMOS/DMOS Process FEATURES: • CMOS Construction • Similar to Industry Part Number MIC4420 • Low Output Impedance, 2.5 Ohms • Latch-Up Protected; Will Withstand > 500 mA Reverse Output Current • Logic Input Withstands Negative Swing of Up to 5V www.DataSheet4U.com MAXIMUM RATINGS RATING Power Dissipation Derating Factors (CerPack) Storage Temperature Lead Temperature (10sec) Supply Voltage Input Voltage, (VS + 0.3V to Ground) Input Current (VIN >VS) SYMBOL MIN. -65 TYP. MAX. 1,250 10 +150 300 20 -5.0 50 UNITS mW mW/°C °C °C Volts Volts mA ELECTRICAL CHARACTERISTICS Logic 1 Input Voltage Logic 0 Input Voltage Input Voltage Range Input Current, (0V ≤ VIN ≤ VS High Output Voltage Low Output Voltage Output Resistance, Output Low, (IOUT = 10mA, Vs = 18V Output Resistance, Output High, (IOUT = 10mA, Vs = 18V Peak Output Current VS = 18V Latch-Up Protection Rise Time, (CL = 2500 pF) Fall Time, (CL = 2500 pF) Delay Time Delay Time Power Supply Current, (VIN = 3.0V) (VIN = 0V) Operating Input Voltage VIH VIL VIN IIN VOH VOL RO RO IPK IR tR tF td1 td2 IS VS A T = 25°C with 4.5V ≤ VS ≤ 18V otherwise specified. A 2.4 -5.0 -10 VS -0.025 >500 4.5 1.4 1.1 1.7 1.5 6.0 12 13 18 48 0.45 90 - 0.8 VS +0.3 10 0.025 2.8 2.5 35 35 75 75 1.5 150 18 Volts Volts Volts µA Volts Volts Ohms Ohms Amps mA ns ns ns ns mA µA Volts ELECTRICAL CHARACTERISTICS Logic 1 Input Voltage Logic 0 Input Voltage Input Voltage Range Input Current, (0V ≤ VIN ≤ VS High Output Voltage Low Output Voltage T = -55°C to +125°C with 4.5V ≤ VS ≤ 18V otherwise specified. VIH VIL VIN IIN VOH VOL 2.4 -5.0 -10 VS -0.025 - - 0.8 VS +0.3 10 0.025 Volts Volts Volts µA Volts Volts •221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798• • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] • SHD850001 TECHNICAL DATA DATA SHEET 272, REV. A ELECTRICAL CHARACTERISTICS (Continued) RATING Output Resistance, Output Low, (IOUT = 10mA, Vs = 18V) Output Resistance, Output High, (IOUT = 10mA, Vs = 18V) Rise Time, (CL = 2500 pF) Fall Time, (CL = 2500 pF) Delay Time Delay Time www.DataSheet4U.com Power Supply Current, (VIN = 3.0V) (VIN = 0V) Operating Input Voltage T = -55°C to +125°C with 4.5V ≤ VS ≤ 18V otherwise specified. A SYMBOL RO RO tR tF td1 td2 IS VS MIN. 4.5 TYP. 3.0 2.3 32 34 50 65 0.45 0.06 - MAX. 5.0 5.0 60 60 100 100 3.0 0.4 18 UNITS Ohms Ohms ns ns ns ns mA mA Volts MECHANICAL DIMENSIONS: in Inches / mm 1 10 125±.010 [3.18±.25] CerPack-10 PINOUT TABLE DEVICE TYPE MOSFET CERPACK-10 Pin- 1 VS Pin-2 Input Pin-3 N/C Pin-4 Gnd. Pin-5 N/C Pin-6 N/C Pin-7 Gnd. Pin-8 Output Pin-9 Output Pin-10 VS •221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (631) 586-7600 • FAX (631) 242-9798• • World Wide Web Site - http://www.sensitron.com • E-mail Address - [email protected] • SHD850001 TECHNICAL DATA DATA SHEET 272, REV. A DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. www.DataSheet4U.com 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. •221 WEST INDUSTR.


SHD834004 SHD850001 SHD850003D


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)