MIL-PRF-55310

INCH-POUND MIL-PRF-55310/18D 8 July 2002 SUPERSEDING MIL-PRF-55310/18C 25 March 1998 PERFORMANCE SPECIFICATION SHEET OSCILLATOR, CRYSTAL CONTROLLED, TYPE 1 (CRYSTAL OSCILLATOR (XO)), 0.01 Hz THROUGH 15.0 MHz, HERMETIC SEAL, SQUARE WAVE, CMOS www.DataSheet4U.com This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification and MIL-PRF-55310. Pin number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Inches .002 .018 .100 .150 .20 mm 0.05 0.46 2.54 3.81 5.1 Function NC NC NC NC NC NC B - (GND/CASE) OUTPUT NC NC NC NC NC B+ mm 6.9 7.62 11.2 13.7 22.53 Inches .27 .300 .44 .54 .887 NOTES: 1. Dimensions are in inches. 2. Metric equivalents are given for general information only. 3. Unless otherwise specified, tolerances are ±.005 (0.13 mm) for three place decimals and ±.02 (0.5 mm) for two place decimals. 4. All pins with NC function may be connected internally and are not to be used as external tie points or connections. FIGURE 1. Dimensions and configuration. AMSC N/A 1 of 5 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. FSC 5955 MIL-PRF-55310/18D REQUIREMENTS: Interface and physical dimensions: See figure 1. Mounting: See figure 1. Terminals: See figure 1. Seal: Hermetic in accordance with MIL-PRF-55310, maximum leakage rate 5 x 10 atm cc/s. Weight: 0.5 ounce, maximum. www.DataSheet4U.com * Oscillator: Class 2 (see 1.2....