SP9602

SP9602 SIGNAL PROCESSING EXCELLENCE Dual, 12–Bit, Low Power Voltage Output D/A Converter s Low Cost s Two 12–Bit DAC’s on a Single Chip s Very Low Power — 16 mW (8mW/DAC) s Double-Buffered Inputs s ± 5V Supply Operation s Voltage Outputs, ± 4.5V Range s Midscale Preset, Zero Volts Out s Guaranteed +0.5 LSB Max INL www.DataSheet4U.com s Guaranteed +0.75 LSB Max DNL s 250kHz 4-Quadrant Multiplying Bandwidth s Separate Reference Inputs s 28–pin SOIC and Plastic DIP Packages s Either 12 or 8 bit µp bus DESCRIPTION The SP9602 is a low power, dual 12–Bit Digital-to-Analog Converter. It features +4.5V output swings when using +5 volt supplies. The converter is double-buffered for easy microprocessor interface. Each 12–Bit DAC is independently addressable and both DACS may be simultaneously updated using a single transfer command. The output settling-time is specified at 30µs. The SP9602 is available in 28–pin SOIC and plastic DIP packages, specified over commercial temperature range. Ref In 1 INPUT REGISTERS DATA INPUTS 8 MSB's 4 LSB's LATCH LATCH DAC LATCH DAC REGISTERS – LATCH DAC + VOUT1 Ref In 2 – + VOUT2 CONTROL LOGIC A CS WR1 B1/B2 WR2 XFER CLR SP9602DS/02 SP9602 Dual, 12-Bit, Low Power Voltage Output D/A Converter © Copyright 1999 Sipex Corporation 1 ABSOLUTE MAXIMUM RATINGS These are stress ratings only and functional operation of the device at these or any other above those indicated in the operation sections of the specifications below is not implied. Exposure t...