Voltage Output D/A Converter
SP9502
SIGNAL PROCESSING EXCELLENCE
Dual, 12–Bit, Voltage Output D/A Converter
s Low Cost s Two 12-bit DAC’s on a Singl...
Description
SP9502
SIGNAL PROCESSING EXCELLENCE
Dual, 12–Bit, Voltage Output D/A Converter
s Low Cost s Two 12-bit DAC’s on a Single Chip s Low Power — 40 mW (20mW/DAC) s Double-Buffered Inputs s ± 5V Supply Operation s Voltage Outputs, ± 4.5V Range s Midscale Preset, Zero Volts Out s Guaranteed +0.5 LSB Max INL www.DataSheet4U.com s Guaranteed +0.75 LSB Max DNL s 2 MHz 4-Quadrant Multiplying Bandwidth s Separate Reference Inputs s 28–pin SOIC and Plastic DIP Packages s Either 12 or 8 bit µp bus DESCRIPTION The SP9502 is a low power, dual version of the popular SP9345, Quad 12-Bit Digital-to-Analog Converter. It features ±4.5V output swings when using ±5 volt supplies. The converter is doublebuffered for easy microprocessor interface. Each 12-bit DAC is independently addressable and both DACS may be simultaneously updated using a single transfer command. The output settling-time is specified at 4µs. The SP9502 is available in 28–pin SOIC and DIP packages, specified over commercial temperature range.
Ref In 1 INPUT REGISTERS DATA INPUTS 8 MSB's 4 LSB's LATCH LATCH DAC LATCH DAC REGISTERS – LATCH DAC + VOUT1 Ref In 2
– + VOUT2
CONTROL LOGIC
A
CS
WR1 B1/B2 WR2 XFER CLR
SP9502DS/02
SP9502 Dual, 12-Bit, Voltage Output D/A Converter
© Copyright 1999 Sipex Corporation
1
ABSOLUTE MAXIMUM RATINGS
These are stress ratings only and functional operation of the device at these or any other above those indicated in the operation sections of the specifications below is not implied. Exposure ...
Similar Datasheet