China Electronics Technology Group Corporation No.26 Research Institute
159.5MHz IF SAW Filter 11MHz Bandwidth
Part Num...
China Electronics Technology Group Corporation No.26 Research Institute
159.5MHz IF SAW Filter 11MHz Bandwidth
Part Number: LBT16040
www.sipatsaw.com
SIPAT Co., Ltd.
Specifications
Parameter Center Frequency
Insertion Loss 1 dB Bandwidth 3 dB Bandwidth
www.DataSheet4U.com 40 dB Bandwidth
Unit
MHz dB MHz MHz MHz dB usec
Minimum
159.4 11.3 50
Typical
159.5 30 10.91 11.38 12.96 0.9 3.1 60 -2.87 25
Maximum
159.6 31 13.2 1 3.5 -
Passband Variation Absolute Delay Ultimate Rejection(f0±15MHz) Material Temperature coefficient Ambient Temperature Package Size
dB
KHz/°C °C
DIP3512 (35.0x12.8x4.7mm3)
Notes:
1. All specifications are based on the test circuit shown 2. In production, devices will be tested at room temperature to a guardbanded specification to ensure electrical compliance over temperature 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances 4. This is the optimum impedance in order to achieve the performance show
Matching Configuration
INPUT 50Ω C1
L1
L1=15nH
L2 OUTPUT 50Ω C2
L2=18nH C2=39pF
C1=27pF
Source/Load Impedance=50 ohm
Notes - Component values may change depending on board layout.
SIPAT Co., Ltd.
( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818
Part Number Rev. Date Ver.
LBT16040 2007-07-31 1.1 Page 1/4
Fax: +86-23-62805284
www.sipatsaw.com /
[email protected]
China Electronics Technology Group Corpora...