DatasheetsPDF.com

ACTR0010 Dataheets PDF



Part Number ACTR0010
Manufacturers Advanced Crystal Technology
Logo Advanced Crystal Technology
Description surface-acoustic-wave (SAW) resonator
Datasheet ACTR0010 DatasheetACTR0010 Datasheet (PDF)

Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] The ACTR0010/910.0/QCC8C is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount ceramic QCC8C case. It provides reliable, fundamental-mode, quartz frequency stabilization i.e. in transmitters or local oscillators operating at 910.000 MHz. 1.Package Dimension (QCC8C) 2. Pin 2 6 www.DataSheet4U.com Configuration Input / Output Input / Output Case Ground NC Sign E F G H Data (unit: mm) 1.2 1.35 5.0 5.0.

  ACTR0010   ACTR0010


Document
Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] The ACTR0010/910.0/QCC8C is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount ceramic QCC8C case. It provides reliable, fundamental-mode, quartz frequency stabilization i.e. in transmitters or local oscillators operating at 910.000 MHz. 1.Package Dimension (QCC8C) 2. Pin 2 6 www.DataSheet4U.com Configuration Input / Output Input / Output Case Ground NC Sign E F G H Data (unit: mm) 1.2 1.35 5.0 5.0 4,8 1,3,5,7 Sign A B C D Data (unit: mm) 2.08 0.6 1.27 2.54 3.Equivalent LC Model and Test Circuit 4.Typical Application Circuits 1) Low-Power Transmitter Application 2) Local Oscillator Application In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 1 OF 3 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 5.Typical Frequency Response 6.Temperature Characteristics www.DataSheet4U.com 7.Performance 7-1.Maximum Ratings Rating CW RF Power Dissipation DC Voltage Between Terminals Case Temperature Soldering Temperature Value 0 ±30V -40 to +85 +250 Units dBm VDC °C °C 7-2.Electronic Characteristics Characteristic Centre Frequency (+25 °C) Insertion Loss Unloaded Q Quality Factor 50 Ω Loaded Q Turnover Temperature Temperature Stability Turnover Frequency Frequency Temperature Coefficient Frequency Aging Absolute Value during the First Year Absolute Frequency Tolerance from 910.000 MHz Sym fC ∆ fC IL QU QL T0 f0 FTC |fA| Minimum 909.850 Typical Maximum 910.150 Units MHz kHz ±150 1.2 11,500 1,500 25 fC 0.032 ≤10 1.0 55 1.6 dB °C kHz ppm/ °C2 ppm/yr MΩ DC Insulation Resistance Between Any Two Terminals Motional Resistance RF Equivalent RLC Model Motional Inductance Motional Capacitance Shunt Static Capacitance RM LM CM C0 15 30.1848 1.0144 2.10 2.40 20 Ω µH fF 2.70 pF CAUTION: Electrostatic Sensitive Device. Observe precautions for handling! In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 2 OF 3 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 1. 2. 3. 4. 5. www.DataSheet4U.com 6. 7. 8. 9. The centre frequency, f C, is measured at the minimum IL point with the resonator in the 50 Ω test system. Unless noted otherwise, case temperature T C = +25°C±2°C. Frequency aging is the change in f C with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures above +65°C. Typically, aging is greatest the first year after manufacture, decreasing in subsequent years. Turnover temperature, T0, is the temperature of maximum (or turnover) frequency, f 0. The nominal frequency 2 at any case temperature, T C, may be calculated from: f = f 0 [1 - FTC (T 0 - TC) ]. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided for reference only. The capacitance C 0 is the measured static (non-motional) capacitance between the two terminals. The measurement includes case parasitic capacitance. Derived mathematically from one or more of the following directly measured parameters: f C, IL, 3 dB bandwidth, fC versus TC, and C 0. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. Typically, equipment utilizing this device requires emissions testing and government approval, which is the responsibility of the equipment manufacturer. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK Issue : 1 C1 Date : SEPT 04 http://www.actcrystals.com 3 OF 3 .


TNR9CxxxK ACTR0010 AME5104


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)