NAS1352

www.DataSheet4U.com NAS1351 (Fine) and NAS1352(Coarse) Socket Head Cap Screws Genuine Aircraft Hardware Co. Then to designate material add a( - ) for Alloy Steel 180KSI, or a ( C ) for Corrosion Resistant Steel (18-8) 80KSI, or an ( N ) 140-160KSI for Heat Resisting Steel per AMS5731 or 5737 (A286). After the ( - , C, or N) for material, place the Diameter Designation for your desired Shank Diameter that corresponds with your desired Thread Size. After all that but before the Length add Features if desired. After features (if any) then the Overall DataSheet4U.com Features for rotational security. Length is stated in 1/16ths of an inch. The last ( H ) for Drilled Head, or designation is for plating or finish. P= Cadmium II Plating Type 2, class 2, All materials ( LE ) for self locking element any type ( LL ) for self locking element Strip Type S= Silver Flashed for ( C ) and ( N ) materials. ( LN ) for self locking element Pellet Type No Suffix = Black oxide for (Alloy Steel) and Passivated for ( C ) and ( N ) Materials Socket Head Cap Screw, 1/4-28 Threads, Alloy Steel, Holes in Head , 7/8” Overall Length, Black Oxide Coated. HELP WITH THE SELECTION OF PART NUMBERS The four numbers after “NAS” denote “Fine” or “Course” Threads Lengths may be requested that are less than “Thread Length Min”, they will just be fully threaded DataShee ( LB ) for self locking element Patch Type Example of Part Number: NAS1351-4H14 DataSheet4U.com Documents in this book for REFERENCE ONL...