MX29LV640T

www.DataSheet4U.com MX29LV640T/B FEATURES 64M-BIT [8M x 8/4M x 16] SINGLE VOLTAGE 3V ONLY FLASH MEMORY SOFTWARE FEATURES Support Common Flash Interface (CFI) - Flash device parameters stored on the device and provide the host system to access. Erase Suspend/ Erase Resume - Suspends sector erase operation to read data from or program data to another sector which is not being erased Status Reply - Data polling & Toggle bits provide detection of program and erase operation completion GENERAL FEATURES Single Power Supply Operation - 2.7 to 3.6 volt for read, erase, and program operations 8,388,608 x 8 / 4,194,304 x 16 switchable Sector structure - 8KB (4KW) x 8 and 64KB(32KW) x 127 Sector Protection/Chip Unprotect - Provides sector group protect function to prevent program or erase operation in the protected sector group - Provides chip unprotect function to allow code changes - Provides temporary sector group unprotect function for code changes in previously protected sector groups Secured Silicon Sector - Provides a 128-word area for code or data that can be permanently protected. - Once this sector is protected, it is prohibited to program or erase within the sector again. Latch-up protected to 250mA from -1V to Vcc + 1V Low Vcc write inhibit is equal to or less than 1.5V Compatible with JEDEC standard - Pin-out and software compatible to single power supply Flash PERFORMANCE High Performance - Fast access time: 90/120ns - Fast program time: 11us/wor...