www.DataSheet4U.com
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
APPLICATIONS
Where steep pulses occur e.g. SMPS (switch mode power supplies). Electronic lighting e.g. Ballast. Motor control circuits. S - correction. For flyback applications please use 1400 V series. For hot asphalt encapsulation process.
168x12(halfpage)
l
w
l h h'
w
h lt P Ødt 10 15
Dimensions in mm. (1) ⎪F − F’⎪ < 0.3 mm. F = 7.5 +0.6/−0.1 mm.
MARKING
C-value; tolerance; rated voltage; code for dielectric material; code for factory of origin; manufacturer’s type designation; manufacturer; year and week of manufacture
F' (1) F
H
Ødt
DIELECTRIC
Polypropylene film
ELECTRODES
Metallized film
CLIMATIC CATEGORY
55/105/56
ENCAPSULATION
Flame retardant plastic case and epoxy resin (UL-class 94 V-0)
RATED (DC) TEMPERATURE
85 °C
CONSTRUCTION
Internal serial construction
RATED (AC) TEMPERATURE
105 °C
LEADS
Tinned wire
MAXIMUM APPLICATION TEMPERATURE
e3
105 °C
REFERENCE SPECIFICATIONS CAPACITANCE RANGE (E24 SERIES):
0.001 to 2.7 µF IEC 60384-17
PERFORMANCE GRADE CAPACITANCE TOLERANCE:
±5% Grade 1 (long life)
STABILITY GRADE RATED (DC) VOLTAGE
250 V; 400 V; 630 V; 1000 V; 1400 V;1600 V; 2000 V; 2500 V Grade 2
FEATURES
7.5 mm bent back pitch. 15 to 27.5 mm lead pitch. Low contact resistance. Low loss dielectric. Small dimensions for high density packaging. Supplied loose in box and taped on reel Lead (Pb)-free product
RATED (AC) VOLTAGE
125 V; 200 V; 220 V; 350 V; 500 V; 550 V; 700 V; 900 V
RATED PEAK-TO-PEAK VOLTAGE
350 V; 560 V; 630 V; 1000 V; 1400 V; 1600 V; 2000 V; 2500 V
DETAIL SPECIFICATION
For more detailed data and test requirements contact:
[email protected]
Document Number: 28124 Revision: 28-Feb-05
For technical questions contact:
[email protected]
www.vishay.com 201
www.DataSheet4U.com
MMKP 383
Vishay BCcomponents
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
COMPOSITION OF CATALOG NUMBER
TYPE AND PITCHES 15.0/7.5 mm 383 15.0 mm 22.5 mm 27.5 mm Example: 104 = 10 x 10 = 100 nF MULTIPLIER (nF) 0.1 1 10 100 2 3 4 5
CAPACITANCE (numerically)
2222
383 XX XX X
PREFERRED TYPES C-TOL ±5% ±5% 250 V 00 03 400 V 630 V 1000 V 1400 V 1600 V 2000 V 2500 V 10 20 30 40 50 60 70 13 23 33 43 53 63 − dimensions relating to this code should remain in Parenthesis ON REQUEST 11 21 31 41 51 61 71 14 24 34 44 54 64 74 12 22 32 42 52 62 72 15 25 35 45 55 65 − dimensions relating to this code should remain in Parenthesis − − − 46 56 66 − dimensions relating to this code should remain in Parenthesis
TYPE
PACKAGING loose in box taped on reel (bent back)
LEAD CONFIGURATION lead length 3.5 mm H = 16.0 mm; P0 = 15.0 mm reel diameter = 500 mm lead length 5.0 mm lead length 25.0 mm H = 18.5 mm; P0 = 12.7 mm H = 16.0 mm; P0 = 15.0 mm reel diameter = 356 mm H = 16.0 mm; P0 = 15.0 mm reel diameter = 356 mm for hot asphalt encapsulation
383
loose in box taped on reel taped on reel (bent back) taped on reel (bent back)
±5% ±5% ±5% ±5% ±5%
383
01 04 02 05 −
SPECIFIC REFERENCE DATA (250 VDC)
DESCRIPTION Tangent of loss angle: C ≤ 0.15 µF 0.15 µF < C ≤ 0.39 µF 0.39 µF < C ≤ 0.56 µF 0.56 µF < C ≤ 0.82 µF 0.82 µF < C ≤ 1.2 µF 1.2 µF < C ≤ 1.8 µF 1.8 µF < C ≤ 2.2 µF 2.2 µF < C ≤ 2.7 µF Rated voltage pulse slope (dU/dt)R: P = 15.0 mm and 7.5 mm (bent back), for C ≤ 0.15 µF P = 15.0 mm and 7.5 mm (bent back),for 0.15 µF < C ≤ 0.39 µF P = 22.5 mm P = 27.5 mm, for 0.82 µF < C ≤ 2 µF P = 27.5 mm, for 2 µF < C ≤ 2.7 µF R between leads, for C ≤ 1 µF at 100 V; 1 minute RC between leads, for C >1 µF at 100 V; 1 minute R between leads and case; 100 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 10 kHz ≤5 × 10−4 ≤5 × 10−4 ≤10 × 10−4 ≤10 × 10−4 ≤10 × 10−4 ≤15 × 10−4 ≤15 × 10−4 ≤15 × 10−4 450 V/µs 900 V/µs 290 V/µs 190 V/µs 130 V/µs >100000 MΩ >100000 s >30000 MΩ >220 V 400 V; 1 minute 2840 V; 1 minute VALUE at 100 kHz ≤20 × 10−4 ≤25 × 10−4 ≤45 × 10−4 ≤50 × 10−4 ≤65 × 10−4 ≤75 × 10−4 ≤85 × 10−4 ≤95 × 10−4
www.vishay.com 202
For technical questions contact:
[email protected]
Document Number: 28124 Revision: 28-Feb-05
www.DataSheet4U.com
MMKP 383
AC and Pulse Double Metallized Polypropylene Film Capacitors MMKP Radial Potted Type
Vishay BCcomponents
URdc = 250 V; URac = 125 V/Up-p = 350 V
CATALOG NUMBER 2222 383 ..... AND PACKAGING LOOSE IN BOX C (µF) DIMENSIONS w × h (h’) × l (mm) MASS (g) lt = 3.5 ±0.3 mm C-tol = ±5% short leads long leads original pitch REEL pitch = 7.5 mm (bent back) C-tol = ±5% ∅ 500 mm last 5 digits of catalog number Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm 0.082 0.091 0.1 0.11 0.12 0.13 0.15 0.16 0.18 0.2 0.22 0.24 0.27 0.3 0.33 0.36 0.39 Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.43 0.47 0.51 0.56 0.62 0.68 0.75 0.82 Pitch = 27.5 .