HA10

www.DataSheet4U.com Current Transducer HA 10 to 25-NP For the electronic measurement of DC, AC and pulsed currents, with a galvanic isolation between the primary (high power) circuit and the secondary (electronic) circuit. IPN = 5 .. 25 A Electrical data Primary Nominal Rms current IPN (A) Primary terminal connections HA 10-NP HA 25-NP ÎP VOUT RL VC IC Vb Vd Series ±5 ± 12.5 Parallel ± 10 ± 25 Primary Current measuring range IP (A) Series 0 .. ± 10 0 .. ± 25 50 x IPN ±4 >4 ± 15 < 20 500 2.5 1 > 500 Parallel 0 .. ± 20 0 .. ± 50 A V kΩ V mA V kV kV MΩ Features Open loop transducer using Hall Effect Ris Overload capacity (1 ms) Analogue output voltage @ ± IPN Load resistance Supply voltage (± 5 %) Current consumption (max) Rms rated voltage1) Rms voltage for AC isolation test, 50 Hz, 1 mn Primary to secondary Primary 1 to primary 2 2) Isolation resistance @ 500 VDC Printed circuit board mounting Insulated plastic case to UL 94-V0 Externally programmable for desired rating Galvanic isolation between primary windings. Advantages Very good linearity Very good accuracy Low temperature drift Wide frequency bandwidth Very low insertion losses High immunity to external interference Current overload capability Low power consumption Wide dynamic range, 5 to 50 A in one package Easy to mount with automated handling systems. Accuracy - Dynamic performance data ε X L Accuracy 3) @ IPN, TA = 25°C, @ ± 15 V Linearity 3) Electrical offset voltage @ I...