267M1002xxxx

www.DataSheet4U.com SOLID-ELECTROLYTE TANTALUM CAPACITORS (TANCHIP SERIES) ® TYPE Epoxy resin molding chip Standard Series 267M CAUTIONS This capacitor is polarized, do not apply reverse voltage. The sum of peak value of AC and DC voltage should not exceed the rated voltage. This catalog is designed for providing general information. Please inquire of our Sales Department to confirm specifications prior to use. CHARACTERISTICS ITEM Failure rate level Operating temperature range Rated voltage Capacitance range Capacitance tolerance CHARACTERISTICS 1%/1000h Ϫ55ϳϩ85°C to ϩ125°C with voltage derating 4Ϫ6.3Ϫ10Ϫ16Ϫ20Ϫ25Ϫ35Ϫ50VDC 0.047ϳ220µF ±10%, ±20% Available capacitance tolerance ±5%(J) upon request. DIMENSIONS Type 267 is specially designed to SMD, based on our technology of chip tantalum capacitors acquired over many years. Fully-molded construction provides excellent mechanical protection, superior moisture resistance and high soldering heat resistance. [A case] L W [B case] W mm P1 P2 P1 [D3, H case] W T [C3, E case] W C FEATURES 1. Small size: A case 3.2ϫ1.6mm 2. Suitable for surface mounting. 3. Precise dimensions allow high density mounting. Symmetrical construction of positive and negative terminals provides “Self Alignment”. 4. Soldering: 260°C for 10 second by re-flow or flow soldering. 5. #376 series of 267M, which are low ESR(Equivalent Series Resistance) series, were developed to meet recent customer's requirement in high ripple current applic...