AAT3155

www.DataSheet4U.com High Efficiency 1X/1.5X/2X Charge Pump For White LED Applications General Description The AAT3155 is a low noise, constant frequency charge pump DC/DC converter that uses a trimode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications. The AAT3155 is capable of driving up to four channels of LEDs at 20mA per channel from a 2.7V to 5.5V input. The current sinks may be operated individually or in parallel for driving higher current LEDs. A low external parts count (two 1µF flying capacitors and two small 1µF capacitors at IN and OUTCP) make this part ideally suited for small, battery-powered applications. AnalogicTech's S2Cwire™ (Simple Serial Control™) serial digital input is used to enable, disable, and set current for each LED with 16 settings down to 50μA. The low-current mode supply current can be as low as 50μA to save power. Each output of the AAT3155 is equipped with builtin protection for output short-circuit and auto-disable for load short-circuit conditions. Built-in softstart circuitry prevents excessive inrush current during start-up. A low-current shutdown feature disconnects the load from the input and reduces quiescent current to less than 1μA. The AAT3155 is available in a Pb-free, space-saving 2.85x3.0mm 12-pin TSOPJW package. AAT3155 Features ChargePump™ VIN Range: 2.7V to 5.5V Fully Programmable Current with Single Wire — 16 Current Levels — Four Lo...