(ABX8037 - ABX8039) Low Phase Noise XO
www.DataSheet4U.com
(Preliminary)
ABX8037/38/39
38-640MHz Low Phase Noise XO
FEATURES
• • • Less than 0.4ps RMS (12kH...
Description
www.DataSheet4U.com
(Preliminary)
ABX8037/38/39
38-640MHz Low Phase Noise XO
FEATURES
Less than 0.4ps RMS (12kHz-20MHz) phase jitter for all frequencies . Less than 25ps peak to peak jitter for all frequencies. Low phase noise output (@ 1MHz frequency offset ∗ -144dBc/Hz for 106.25MHz ∗ -144dBc/Hz for 156.25MHz ∗ -144dBc/Hz for 212.5MHz ∗ -140dBc/Hz for 312.5MHz, ∗ -131dBC/Hz for 622.08MHz 19MHz-40MHz crystal input. 38MHz-640MHz output. Available in PECL, LVDS, or CMOS outputs. Output Enable selector. 2.5V & 3.3V operation. Available in 3x3 QFN or 16-pin TSSOP packages.
PACKAGE PIN ASSIGNMENT
VDDANA XIN XOUT SEL2^ OE_CTRL DNC GNDANA LP 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 SEL0^ SEL1^ GNDBUF QBAR VDDBUF Q GNDBUF LM
ABX803X
VDDANA
SEL0^
10
DESCRIPTION
The ABX803X is a monolithic low jitter and low phase noise high performance clock, capable of maintaining 0.4ps RMS phase jitter and CMOS, LVDS or PECL outputs, covering a wide frequency output range up to 640MHz. It allows high performance and high frequency output, using a low cost fundamental crystal of between 19-40MHz. The frequency selector pads of ABX803X enable output frequencies of (2, 4, 8, or 16) * F XIN . The ABX803X is designed to address the demanding requirements of high performance applications such Fiber Channel, serial ATA, Ethernet, SAN, etc.
XOUT SEL2^ OE_CTRL DNC
12 13 14 15 16 1
11
SEL1^
9
XIN
16-pin TSSOP 3x3 QFN
8 7
GNDBUF QBAR VDDBUF Q
ABX803X
2 3 4
6 5
GNDANA
Note1...
Similar Datasheet