SF0140BA03114S

www.DataSheet4U.com Micro Networks A Division of Integrated Device Technology 140 MHz SAW Filter 16 MHz Bandwidth Part Number: SF0140BA03114S DESCRIPTION 140 MHz SAW bandpass filter with 16 MHz bandwidth in 13.3x6.5mm SMP. RoHS compliant. TYPICAL PERFORMANCE S11 S22 Horizontal : Vertical (from top) Frequency Magnitude Magnitude Phase Deviation Group Delay Deviation 5 10 1 10 200 MHz / div dB/div dB/div deg/div ns/div Input and Output Impedances Frequency Span : 100-180 MHz Wide Band Response Frequency Span : 0-500 MHz Vertical Scale : 10 dB/div IDT SAW Products 324 Clark Street, Worcester, MA 01606, USA Ph 1-508-852-5400 Fax 1-508-852-8456 www.icst.com/saw.aspx Rev X2 24-Nov-2005 Page 1 of 3 Micro Networks A Division of Integrated Device Technology 140 MHz SAW Filter 16 MHz Bandwidth Part Number: SF0140BA03114S SPECIFICATION Parameter Center Frequency (Fc) 1 Insertion Loss 2 1 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth Passband Ripple 3 Phase Deviation from Linear 3 Group Delay Variation 3 Absolute Delay Ultimate Rejection 4 Substrate Temperature Coefficient of Frequency Ambient Temperature System Source and Load Impedance Notes: Min Typ Max Units 139.6 15 16 40 140 140.4 8.2 11 16.4 17.4 21.1 22 0.43 1 3 14 45 160 0.94 44 Lithium Niobate -90 25 50 MHz dB MHz MHz MHz dB p-p deg p-p ns p-p µs dB ppm/˚C ˚C Ω 1. Average of the lower and upper 3 dB frequencies. 2. Average level in the passband. 3. Evaluated over 80% of the 3dB bandwidth (i.e. F...