MSE08AZ60_1J35D

www.DataSheet4U.com Mask Set Errata MSE08AZ60_1J35D 12/2002 Mask Set Errata for MC68HC08AZ60, Mask 1J35D Introduction This mask set errata applies to this MC68HC08AZ60 MCU mask set: 1J35D MCU Device Mask Set Identification The mask set is identified by a 5-character code consisting of a version number, a letter, two numerical digits, and a letter, for example 1J35D. All standard devices are marked with a mask set number and a date code. MCU Device Date Codes Device markings indicate the week of manufacture and the mask set used. The date is coded as four numerical digits where the first two digits indicate the year and the last two digits indicate the work week. For instance, the date code “0201” indicates the first week of the year 2002. MCU Device Part Number Prefixes Some MCU samples and devices are marked with an SC, PC, or XC prefix. An SC prefix denotes special/custom device. A PC prefix indicates a prototype device which has undergone basic testing only. An XC prefix denotes that the device is tested but is not fully characterized or qualified over the full range of normal manufacturing process variations. After full characterization and qualification, devices will be marked with the MC or SC prefix. © Motorola, Inc., 2002 MSE08AZ60_1J35D MSCAN Extended ID Rejected if STUFF Bit Between ID16 and ID15 SE17-MSCAN For 32-bit and 16-bit identifier acceptance modes, an extended ID CAN frame with a stuff bit between ID16 and ID15 can be erroneously rejected, depen...