GP2A200LCS

GP2A200LCS www.DataSheet4U.com GP2A200LCS s Features 1. Light modulation type which is free from external disturbing light Light Modulation, Reflective Type Photointerrupter s Outline Dimensions Optical center 33 3.1 4.5 17.7 (7.8) (6.8) (Unit : mm) 2. Long focal distance type (Detecting range : 5 to 15mm) 3. Compact type 9 s Applications 1. Copiers 2. Facsimiles 8 φ3. 6.2 2 6 12 (5.8) 7.8 Connector made by JAPAN Amp 175768-3 4.5 3. Laser beam printers (0.65) 0 φ3+ −0.2 2.5 s Absolute Maximum Ratings Parameter Supply voltage Output voltage Output current Operating temperature *2 Storage temperature *1 Symbol VCC VO IOL Topr Tstg (Ta=25˚C) Rating Unit V −0.5 to +7 V 30 50 mA −10 to +70 ˚C −20 to +80 ˚C 26.5 View A 1 2 3 2 1 2 3 View A (0.9) VCC VO GND g ( ) : Reference dimensions g Unspecified tolerances shall be as follows. Dimensions(d) d<6.0 6.0<=d<14.0 14.0<=d Tolerance ±0.2 ±0.3 ±0.4 *1 Sink current refer to Fig.5 *2 The connector should be plugged in/out at normal temperature Internal connection diagram Reflective object Demodulator circuit 3 Constant voltage circuit 2 Amp. 1 Comparator Oscillation circuit Sync. detecting circuit * "OPIC" (Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and signal-processing circuit integrated onto a single chip. Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipmen...