www.DataSheet4U.com
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
SUM60UF thru SUM90UF and SUM60UFSMS thru SUM90UFSMS
Designer’s Data Sheet
Part Number/Ordering Information SUM __ __ __
│ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ └ Package Type __ = Axial Leaded SMS = Surface Mount Square Tab
1/
400 mA 6,000 thru 9,000 VOLTS 60 ns ULTRA FAST RECOVERY RECTIFIER
• • • • • • •
FEATURES:
PIV to 9,000 Volts Hermetically Sealed Axial and Square Tab Surface Mount Package Ultra Fast Recovery 60 nsec Maximum 4/ Void Free Construction Metallurgically Bonded 175°C Maximum Operating Temperature TX, TXV, and S-Level Screening Available 2/ Also Available in Fast Versions, Consult Factory
Voltage/Family 60UF = 6,000V 70UF = 7,000V 80UF = 8,000V 90UF = 9,000V
6/
•
MAXIMUM RATINGS 3/
RATING
Peak Inverse Voltage
SUM60UF and SUM60UFSMS SUM70UF and SUM70UFSMS SUM80UF and SUM80UFSMS SUM90UF and SUM90UFSMS
TA = 25°C TA = 100°C
SYMBOL
PIV
VALUE
6000 7000 8000 9000 400 250 25 -65 to +175
UNIT
Volts
Average Rectified Current Surge Current (1 Cycle) Operating & Storage Temperature 5/
NOTES:
IO1 IO2 IFSM TJ and TSTG
Axial Leaded
mA Amps °C
SMS
1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C
5/ Maximum lead/end temperature for soldering is 250°C, 3/8” from case for 5 sec. maximum. 6/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in suitable dielectric material.
NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0039C
DOC
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
SUM60UF thru SUM90UF and SUM60UFSMS thru SUM90UFSMS
ELECTRICAL CHARACTERISTICS 3/ 6/ CHARACTERISTICS
Maximum Forward Voltage (300µs pulse minimum) Maximum Reverse Leakage Current (VR = Rated) Maximum Junction Capacitance VR = 100 Vdc, f = 1MHz, TA = 25°C Maximum Reverse Recovery Time IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C Typical Thermal Impedance Junction to Lead for Axial, L =.375" Junction to End Tab for Surface Mount IF = 400 mA (TA = +25°C) (TA =+100°C)
SYMBOL
VF IR1 IR2 CJ trr RθJL RθJE
VALUE
15 1.0 15
8 60 18 18
UNIT Vdc µA µA pF ns
°C/W
NOTES:
1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C 5/ Maximum lead/end temperature for soldering is 250°C, 3/8” from case for 5 sec. maximum. 6/ Operating and testing over 10,000 V/inch may require encapsulation or immersion in suitable dielectric material.
Package Outlines:
DIMENSIONS (inches) DIM. DIMENSIONS (inches)
A B C D
Minimum .065 --.047 1.00
Maximum .165 .350 .053 ---
DIM. A B C D
Minimum .170 .330 .020 .002
Maximum .180 .380 .030 ---
AXIAL
SMS
NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0039C
DOC
.