BGA2714

www.DataSheet4U.com BGA2714 MMIC wideband amplifier Rev. 01 — 24 May 2007 Product data sheet 1. Product profile 1.1 General description Silicon Monolitic Microwave Integrated Circuit (MMIC) wideband amplifier with internal matching circuit in a 6-pin SOT363 plastic SMD package. Table 1. Typical performance Tamb = 25 °C; measured on demo board; typical values. f (MHz) 250 950 2150 VSUP (V) 3.0 3.0 3.0 ISUP (mA) 4.58 4.58 4.58 Gp (dB) 20.7 20.4 20.8 NF (dB) 2.4 2.2 3.0 PL(1dB) (dBm) −7.8 −7.9 −9.0 PL(sat) (dBm) −2.4 −3.4 −4.7 IP3O (dBm) 4.3 2.1 0.0 CAUTION This device is sensitive to ElectroStatic Discharge (ESD). Therefore care should be taken during transport and handling. 1.2 Features I I I I I I I I Internally matched to 50 Ω Wide frequency range (2.7 GHz at 3 dB gain bandwidth) Flat 21 dB gain (± 1 dB from DC up to 2500 MHz) Very low current (4.6 mA) at low supply voltage of 3 V Very good reverse isolation (> 50 dB up to 2 GHz) Good linearity with low second order and third order products Low noise (NF = 2.2 dB at 1 GHz) Unconditionally stable (K > 5) 1.3 Applications I LNB IF amplifiers I General purpose low noise wideband amplifier for frequencies between DC and 2.7 GHz www.DataSheet4U.com NXP Semiconductors BGA2714 MMIC wideband amplifier 2. Pinning information Table 2. Pin 1 2, 5 3 4 6 Pinning Description VSUP GND2 RF_OUT GND1 RF_IN 1 2 3 6 5 4 6 4 2, 5 sym052 Simplified outline Symbol 1 3 3. Ordering information Table 3. Ordering information Package Name BGA2714 ...