DatasheetsPDF.com

MAAP-000044-PKG003 Dataheets PDF



Part Number MAAP-000044-PKG003
Manufacturers Tyco Electronics
Logo Tyco Electronics
Description Amplifier
Datasheet MAAP-000044-PKG003 DatasheetMAAP-000044-PKG003 Datasheet (PDF)

www.DataSheet4U.com RoHS Compliant MAAP-000044-PKG003 Rev A Preliminary Datasheet Amplifier, Power, 0.5W 12.7-15.4 GHz Features ♦ ♦ ♦ ♦ 0.5 Watt Saturated Output Power Level Variable Drain Voltage (6-10V) Operation MSAG™ Process 5x5 mm 20 Lead MLP Package Description The MAAP-000044-PKG0003 is a 3-stage 0.5 W power amplifier with on-chip bias networks in a 20 lead MLP package, allowing easy assembly. This product is fully matched to 50 ohms on both the input and output. It can be used as a p.

  MAAP-000044-PKG003   MAAP-000044-PKG003



Document
www.DataSheet4U.com RoHS Compliant MAAP-000044-PKG003 Rev A Preliminary Datasheet Amplifier, Power, 0.5W 12.7-15.4 GHz Features ♦ ♦ ♦ ♦ 0.5 Watt Saturated Output Power Level Variable Drain Voltage (6-10V) Operation MSAG™ Process 5x5 mm 20 Lead MLP Package Description The MAAP-000044-PKG0003 is a 3-stage 0.5 W power amplifier with on-chip bias networks in a 20 lead MLP package, allowing easy assembly. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or as a driver stage in high power applications. Each device is 100% RF tested to ensure performance compliance. The part is fabricated using M/A-COM’s GaAs Multifunction Self-Aligned Gate (MSAG™) Process. YYWW AP044G XXXX MACOM Primary Applications ♦ Point-to-Point Radio 13 and 15 GHz Bands ♦ SatCom ♦ Radio Communications ◊ Also Available in: Description Part Number Die MAAPGM0044-DIE SAMPLE BOARD Plastic Package MAAP-000044-SMB003 Electrical Characteristics: TC = 30°C1, Z0 = 50Ω, VDD = 8V, IDQ = 210 mA2, Pin = 14dBm, RG = 350Ω Parameter Bandwidth Output Power Power Added Efficiency 1-dB Compression Point Small Signal Gain Input VSWR Output VSWR Gate Supply Current Drain Supply Current Output Third Order Intercept 3 Order Intermodulation Distortion, Single Carrier Level = 16 dBm 1. 2. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. rd Symbol f POUT PAE P1dB G VSWR VSWR IGG IDD OTOI IM3 Typical 12.7-15.4 27 22 26 17 2.5:1 2.2:1 <2 < 0.4 34 -20 Units GHz dBm % dBm dB — — mA A dBm dBm TC = Case Temperature. Adjust VGG between –2.6 to-1.2 to achieve indicated IDQ. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Amplifier, Power, 0.5W 12.7-15.4 GHz Maximum Ratings3 Parameter Input Power Drain Supply Voltage Gate Supply Voltage Quiescent Drain Current (No RF) Quiescent DC Power Dissipated (No RF) Junction Temperature Storage Temperature Symbol PIN VDD VGG IDQ PDISS TJ TSTG Absolute Maximum 19.0 +12.0 -3.0 340 3.4 170 -55 to +150 Units dBm V V mA W °C °C MAAP-000044-PKG003 Rev A Preliminary Datasheet 3. Operation beyond these limits may result in permanent damage to the part. Recommended Operating Conditions4 Characteristic Drain Supply Voltage Gate Supply Voltage Input Power Junction Temperature Thermal Resistance Package Base Temperature Symbol VDD VGG PIN TJ ΘJC TB 33.4 Note 5 Min 6.0 -2.6 Typ 8.0 -1.7 14.0 Max 10.0 -1.2 17.0 150 Unit V V dBm °C °C/W °C 4. Operation outside of these ranges may reduce product reliability. 5. Maximum Package Case Temperature = 170°C — ΘJC* VDD * IDQ Power Derating Curve, Quiescent (No RF) 4.0 3.5 Peak Power Dissipation (Watts) 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 120 140 160 180 Maximum Allowable Case Temperature [°C] Operating Instructions This device is static sensitive. Please handle with care. To operate the device, follow these steps. 1. 2. 3. 4. Apply VGG = -1.7 V, VDD= 0 V. Ramp VDD to desired voltage, typically 8 V. Adjust VGG to set IDQ, (approxmately @ –1.7V). Set RF input. 5. Power down sequence in reverse. Turn gate voltage off last. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. • North America Tel: 800.366.2266 / Fax: 978.366.2266 • Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 • Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Amplifier, Power, 0.5W 12.7-15.4 GHz IDQ = 210mA 35 33 31 29 P1dB (dBm) 27 25 23 21 19 17 15 12.4 MAAP-000044-PKG003 Rev A Preliminary Datasheet 30 6 6V 8V 10V 25 VDD = 6V VDD = 8V VDD = 10V Small Signal Gain 5 Gain (dB) 20 4 15 Output VSWR 3 10 2 Input VSWR 12.7 13.0 13.3 13.6 13.9 14.2 14.5 14.8 15.1 15.4 15.7 5 12.4 12.7 13.0 13.3 13.6 13.9 14.2 14.5 14.8 15.1 15.4 1 15.7 Frequency (GHz) Frequency (GHz) Figure 1. 1 dB Compression Point vs. Frequency and Drain Voltage at IDQ = 210mA 35 33 31 29 Output Power (dBm) 27 25 23 21 19 17 15 12.4 Figure 2. Small Signal Gain and Input & Output VSWR vs. Frequency and Drain Voltage at IDQ = 210mA IDQ = 340mA 30 6 6V 8V 10V 25 Small Signal Gain VDD = 6V VDD = 8V VDD = .


MAAP-000042-PKG003 MAAP-000044-PKG003 MAAP-007649-000100


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)