Uniprocessor System Controller
STP2200ABGA
July 1997
USC
DATA SHEET DESCRIPTION
The Uniprocessor System Controller (USC) has a DRAM memory controller ...
Description
STP2200ABGA
July 1997
USC
DATA SHEET DESCRIPTION
The Uniprocessor System Controller (USC) has a DRAM memory controller and functions to regulate the flow of requests and data on the UPA bus. It also controls the resets going to all UPA clients.
Uniprocessor System Controller
Features
Controls up to eight standard SS-10/SS-20-type DRAM SIMMs Supports various memory SIMM organizations: 16 MB, 64 MB, and 256 MB as well as dual-stacked 128-MB SIMMs Controls and generates a number of resets for the system Programmed via a standard 8-bit asynchronous interface (EBus) JTAG interface allows full chip scan 225-pin ABGA package
Benefits
Standard workstation memory Flexibility High integration Allows design of low-cost, low-chip-count embedded systems Ease of design and testability Low cost
www.DataSheet4U.com
The USC is used as the system controller of a complete Uniprocessor UltraSPARC system. Note: Instead of using the U2S, the USC can also be used with the UPA to PCI-bus; I/O interface controller (U2P)
UPA Devices
Abbreviations USC RIC U2S U2P XBI SC_UP RISC SYSIO Psycho BMX Part Number STP 2200ABGA STP2210QFP STP2220ABGA STP2222ABGA STP2230SOP Description Uniprocessor System Controller Reset/Interrupt/Clock Controller UPA to SBus I/O interface controller UPA to PCI bus I/O Interface controller Crossbar Data Path
Note: This data sheet refers to the UPA to System I/O interface. The UPA to PCI bus Interface controller (U2P) can be substituted where U2S ap...
Similar Datasheet