Surface Mount Aluminum Electrolytic Capacitors
FEATURES • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNT • HIGH VOLTAGE (160VDC AND 450VDC) • 10mm x 14mm ~ 18mm x 22mm CASE SIZES includes all homogeneous materials • LONG LIFE (5000 HOURS AT +105OC) *See Part Number System for Details • DESIGNED FOR REFLOW SOLDERING
NACVF Series
RoHS Compliant
CHARACTERISTICS
Rated Voltage Range Rated Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current After 2 Minutes Max. Tan δ at 120Hz & 20°C Low Temperature Stability (Impedance Ratio @ 120Hz) Z -25°C/+20°C 160Vdc 2 200Vdc 0.15 2 160 ~ 450Vdc 2.2 ~ 100µF -40°C ~ +105°C ±20% (M) 0.06CV + 10µA 250Vdc 350Vdc 0.20 3 5
400Vdc 0.24 6
450Vdc 6
Load Life @ 105°C & Rated Voltage Capacitance Change 10x14mm 3,000 hours Tan δ 10x18mm 4,000 hours 12.5 ~ 18mm Dia 5,000 hours Leakage Current Resistance to Soldering Heat Within the Recommended Reflow Conditions Capacitance Change Tan δ Leakage Current
Within ±20% of initial measured value Less than 200% of specificed value Less than the specificed maximum value Within ±10% of initial measured value Less than the specificed maximum value Less than the specificed maximum value
MAXIMUM RIPPLE CURRENT (mA rms AT 100KHz AND 105°C)
www.DataSheet4U.com
MAXIMUM ESR (Ω AT 120Hz AND 20°C)
��� �� �� �� ��� ��� � � � � ��� �µ�� ��� ��� ��� �� �� �� �� �� ��� ��� � � � ���� � ���� ���� ���� ���� ������� ������� ����� ��� ��� ��� ��� � � � � � � ���� ���� ���� ���� ���� ���� � � ���� ���� ���� ���� ���� � ��� ���� ���� ���� ���� ���� � � ��� ���� ���� ���� ���� � � � ��� ��� ��� ���� ���� ���� � � � �
��� �µ�� ��� ��� ��� �� �� �� �� �� ���
��� � � � �� � ��� ��� ���
������� ������� ����� ��� ��� ��� ��� � � � � � � �� ��� ��� ��� ��� � � �� ��� ��� ��� ��� � �� �� ��� ��� ��� ��� � � �� �� ��� ��� ��� � � �
���� ����
RIPPLE CURRENT FREQUENCY CORRECTION FACTORS
Voltage (Vdc) 160V ~ 250V 350V ~ 450V Frequecy (Hz) 120 0.55 0.50 1K 0.85 080 10K ~ 30K 0.90 0.90 31K ~ 100K 1.00 1.00
®
Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel:
[email protected]
PRECAUTIONS
NIC COMPONENTS CORP.
www.niccomp.com
www.lowESR.com
www.RFpassives.com
www.SMTmagnetics.com
17
Surface Mount Aluminum Electrolytic Capacitors
STANDARD PRODUCT AND CASE SIZE TABLE DφxL (mm)
��� �µ�� ��� ��� ��� �� �� �� �� �� ��� ���� ��� ��� ��� ��� ��� ��� ��� ��� ��� ������� ������� ����� ��� � � � �� � �� � ���� � �� �� � �� �� � �� �� � �� �� � �� ��� � � � �� � �� ���� � �� �� � �� �� � �� �� � �� �� � �� ��� � � � �� � �� �� � �� �� � �� �� � �� �� � �� � ��� � �� � �� �� � �� �� � �� �� � �� �� � �� �� � �� � � ��� � �� � �� �� � �� �� � �� �� � �� �� � �� � � � ��� �� � �� �� � �� ���� � �� �� � �� �� � �� � � � �
W
0.3mm max.